How to use and work
During blasting operation
1: To install the nozzle, attach the fixing link to the hole at the tip of the nozzle, insert the pin on the inside of the nozzle to fit the cutout part of this unit, and turn the nozzle to the right.
2:To remove, please turn the nozzle to the left and pull it.
3: Turn the switch on the tip of the nozzle to the item you want to clean.
For inhalation work.
1: Attach the suction nozzle and extension hose to the suction port, and attach the dust bag to the air vent.
2: To install the dust bag, insert the pins inside the dust bag according to the cutout section, then turn the dust bag to the right.
3: To remove, turn counterclockwise to pull out the dust bag, hose, and suction nozzle.
4: Place the tip of the nozzle close to the object you are sucking, then turn on the switch.