Feature

●Industrial motor control, transmission opportunities Quick start and stop, frequent forward and reverse
●Precise positioning, high torque, fast response, light weight. Voltage is determined by the equipped driver, no fixed voltage
●1.8° step angle and 6.0N.m holding torque, stable and practical. Temperature rise up to 176°F (80°C) (rated current, 2-way electricity)
●Bi-phase 86 stepping motor is a subdivided drive, high precision, long life, and low maintenance cost. Maximum radial load is 75N (20mm from flange surface)
●Suitable for industrial motor control and transmission opportunities. Served drive, high precision, low price, long life, low maintenance cost


Description

Specifications:
Condition: 100% Brand New
Item Type: 2 Phase 86 Stepper Motor
Material: Carbon steel
Color: as picture
Purpose: industrial motor control, transmission opportunities
Step angle: 1.8°
Voltage:Determine by the equipped driver, no fixed voltage
Current:4.0A
Holding Torque: 6.0 N.M
Length: Approx. 94mm /3.7"
Shaft Type: Milled Keyway
Step angle accuracy: ±5% (full step)
Resistance accuracy: ±10% (20℃)
Inductance accuracy: ±20% (1KHZ)
Temperature rise: Up to 176°F (80°C) (rated current, 2-way electricity)
Environment Temperature: -4°F to 122°F (-20°C to 50°C).
Insulation Resistance: 100 MQMin, 500 VDC
Withstanding Voltage: 500 VAC per minute
Radial Draft: Maximum 0.0008 inches (0.02 mm) (15.7 oz (450 g) load).
Axial Gap : Maximum 0.08 mm (15.7 oz (450 g) load)
Maximum radial load: 75N (0.8 in (20 mm) from flange surface)
Maximum Axial Load: 15N

Package List:
1 x Two-phase 86 stepping motor

Note:
1. When connecting the motor to the driver, do not connect the wrong phase
2. Due to different operating conditions, the motor may have obvious heat. Motor surface temperature cannot exceed 85°C during operation.
3. When installing the motor, be sure to use the front end cover of the motor to position it and pay attention to the tolerance to ensure the concentration of the motor shaft and load.