Feature
●Size: Black, Inner Diameter: 0.4 inches (9 mm), Outer Diameter: 0.6 inches (15 mm), 50 pcs, Wire Diameter: 0.1 inches (3.1 mm)
●Heat and water resistant O-ring set is ideal for automotive, stationary and hydraulic applications. It can also be used for a variety of purposes such as motorcycles, construction machinery, industrial machinery, and more. Great for sealing leaks such as repairing leaks, machinery, plumbing, automobiles, etc
●The material has excellent oil resistance, corrosion resistance, high temperature resistance, and pressure resistance. In addition, the o-ring set is resistant to oil, gas, water and most silicone liquids and solvents
●The cross section is rounded to provide a seal between the cylindrical overlapping surfaces
●This synthetic rubber o-ring is made to seal a wide variety of fluids such as oil and water liquids, as well as air and gas. It demonstrates a sealing function using the stress caused by moderate compression
[inner diameter 65.2mm outer diameter 70mm width 2.4mm]
[Inner diameter 12mm outer diameter 18mm width 3.1mm]
[inner diameter 20mm outer diameter 26mm width 3.1mm]
[inner diameter 28mm outer diameter 34mm width 3.1mm]
[inner diameter 22mm outer diameter 28mm width 3.1mm]
[Inner diameter 30mm outer diameter 36mm width 3.1mm]
[inner diameter 75.2mm outer diameter 80mm width 2.4mm]
[inner diameter 26mm outer diameter 32mm width 3.1mm]
[inner diameter 4mm outer diameter 10mm width 3.1mm]
[Inner diameter 9mm outer diameter 15mm width 3.1mm]
[inner diameter 21mm outer diameter 27mm width 3.1mm]
Description
Specifications
Product Name: Nitrile Rubber O-Ring
Material: Nitrile Rubber
Dimensions: Width 0.1 inch (3.1 mm), Inner Diameter 0.4 inch (9 mm), Outer Diameter 0.
Color: Black.
Package included: 50pcs
Features
1. Nitrile rubber O-ring can be used in a wide temperature range from -30°C to 100°C. 2. Nitrile rubber, which is a rubber material for O-rings, has superior mechanical properties compared to other elastomers, and has high abrasion resistance. It has excellent resistance to many petroleum, grease, hydraulic actuals, mineral oils, and grease, and can be used normally with inactive chemicals. Despite the inexpensive, it has a good balance of mechanical properties such as abrasion resistance.
3. The recommended value for maximum pressure is 5MPa. However, measurements may vary depending on the conditions. Furthermore, the pressure resistance can be improved with the backup ring.
4. Heat and water resistant O-ring set is ideal for automotive, stationary and hydraulic applications. It can also be used for a variety of purposes such as motorcycles, construction machinery, industrial machinery, and more. Great for sealing leaks such as repairing leaks, machinery, plumbing, automobiles, etc.
Note:
1. Operating temperature range: The recommended value is -30~100℃. However, continuous use at the highest temperature will result in breakage due to thermal cures and shorter service life. Also, at the lowest temperature range, the rubber elasticity will decrease in sealability. Please be careful.
2. Pressure characteristics: The recommended value for maximum pressure is 5MPa. However, measurements may vary depending on the conditions. Furthermore, the pressure resistance can be improved with the backup ring.
3. Storage Notes: Store in a dark place where you cannot touch the outside air as much as possible. Especially when left in direct sunlight or near a light, it is prone to cracks.
4. Using beyond recommended temperature and pressure will cause rapid deterioration. Please be careful.
5. Do not use on electric machines that produce ozone, welding equipment, or applications exposed to UV light due to acetone, ether, ester, ozone, sunlight and weathering.
6. Please be careful when contact with inappropriate fluids.