Feature

●<#=link.text #>


Description

Product description

This is a protective part for the upper rear bumper for corolla cloth.
It protects the top of the rear bumper that can be damaged when loading and unloading cargo and protects your precious vehicle from scratches and dirt.
The material used is made of high-quality 304 stainless steel and is made of thick material to ensure strength.
The cut lines around the outside of the product are made with special rubber that is designed to minimize damage to your vehicle by minimizing the amount of contact with the product itself.
Installation is a simple method of simply attaching the double-sided tape to the back of the product, so anyone can easily enjoy dressing up.
This product is designed specifically for the vehicle that has been scanned from the actual vehicle and created from a special mold.
In particular, we have put effort to adjust the fitting in real vehicles, and we have done numerous adjustments and checks to achieve a quality fit.
This product is meant to be worn on your precious vehicle, and has been carefully crafted with attention to detail.
Give it a try and enjoy your wonderful car life.

Compatible models:
■ Toyota Corolla Cloth (From September 2021)
Hybrid Z
Hybrid S
Hybrid G
Z
S
G
G"X"

Set Contents:
■Product body 1P
Product back has double-sided tape attached.
■Degreaser cleaner
■3M Pack Primer K-500
■Masking tape

Material:
■ High quality stainless steel (SUS304)

Color:
■ Black hairline
The color of the actual product may differ depending on your monitor settings.
[About the warranty]
■ 1 month after the product arrives.
After removing the double-sided tape, we cannot accept returns or exchanges for any reason.

[Precautions]
Please be careful not to apply water or apply pressure for 24 hours after installation.
If you are not worried about the adhesive strength, please prepare the double-sided tape separately.
After removing the double-sided tape, we cannot accept returns or exchanges for any reason.
Please make sure to temporarily align before installation, and check the position of the paste before installation.
Before installing the product, be sure to wipe off the oil on the surface and clean the surface before attaching the double-sided tape.
If the oil and dirt are still adhered to the mounting surface, attaching it with double-sided tape will reduce the adhesion strength of the double-sided tape, and there is a risk of peeling or removing the product.
Always perform the above cleaning before installation.
·We do not guarantee against scratches, damage, etc. when using this product or product. Use at your own risk.

ご注意(免責)>必ずお読みください

■注意事項■ ※この項目内容をご了承の上ご注文ください※ 商品お取り付け前には、必ず装着面の油分をふき取ってもらい、クリーニングした上で両面テープの装着は行ってください。 油分や汚れが装着面に付着したまま、両面テープで装 着いたしますと、両面テープの密着強度が低下し、商品の剥離や脱着の恐れがございます。 商品装着前には両面テープ貼り付け前に必ず、装着位置確認、およびフィッティングの確認をお願いします。 商品裏面の両面テープの赤いフィルムを剥がした後には、いかなる場合も返品·交換のご対応は承りかねます。事前に商品の確認をお願いいたします。 商品検品·梱包には細心の注意を払い実施しておりますが、ごくまれに輸送中の衝撃等で商品に小傷が入る場合がございます。 お取り付けに支障がない状況であれば商品の交換/返品はお受けいたしかねる場合がございます。 ステンレス品などに関しましては輸送中や商品保管時の衝撃から品質を守るために、商品本体表面に傷防止の透明フィルムシートを張り付けております。 商品がお客様のもとへ到着いたしましたら、フィルムを剥がしていただきご装着ください。その際、フィルムの粘着が商品本体に付着する場合があります。 お手数をおかけいたしますが、フィルム粘着は市販のシール剥がしなどで除去をお願いします。 フィルム粘着跡などの交換·返品は承りかねます。 車種によっては、マイナーチェンジや仕様変更などがございます。 商品ページに記載している対応車種·グレードは実車を元に当店にて装着確認済みの情報ですが、ご購入前には装着部位のお車の形状確認をお願い申し上げます。 各商品の適合情報車種、グレードに記載以外の車体、及び他社エアロパーツ装着車に対する対応確認は当店ではいたしておりません。 商品販売ページ画像の表示について、モニターやスマートホン画面の種類によって色味や明るさ、コントラストなどが若干異なります。 商品ページ画像のイメージ違いによる返品·返金は承りかねます。 商品の取り付けにかかった工賃·受付時の電話代など、製品·配送料以外の諸費用に関しましては保証は致しません。 商品取り付け時、お取り付けた後の、商品以外の物品、車体、事故、破損に対する保証は当店では責任を負いかねます。