Product Description

The EDFC 5 incorporates jerk controls developed in collaboration with Professor Takahura Industry University, which provides both sharp handling and a soft ride, and automatically creates the behaviour that drivers demand. The AI function also allows for a proper jerk feel without any discomfort in any riding situation. Furthermore, compared to conventional products that have a notable motor sound on some vehicles, the operation noise is reduced by renewing the method of controlling the motor, and the after-parts have been achieved to be quiet, just like the original. The VA panel has been adopted for the traditional HTN panel, which makes it very beautiful and easy to see.

Main Features:
The attenuation force automatically adjusts according to the JERK jark caused by changes in the deceleration speed G and swivel.
Automatically adjusts the attenuation force according to the deceleration speed G and swivel G
Automatically adjust the attenuation force according to the speed of the car by wiring to the car speed signal, or by attaching the GPS kit (sold separately).
Controlled attenuation force can be adjusted independently by 4 wheels.
Equipped with AI learning function.
Improved silent operation of the motor by reviewing the stepper motor drive method.
The stepper motor can be replaced with EDFC 5 with the previous model number.
Improved visibility of the controller LCD
Attenuation force adjustment levels can be selected from 16 levels, 32 steps, 64 steps, 9 and 6 steps.
The attenuation force can be controlled by 2 external input signals (brakes, scramble switches, etc.)
High response and wireless control
● Can control up to 8 motors (compatible with extendable and contractable dampers, etc.)
26 million full-color backlight that is easy to match the illumination colors in your car.
A variety of display functions (maximum speed, maximum G, travel meter*Position coordinate with altitude, GPS watch*)
When using the optional GPS kit.

Product Introduction https://www.tein.co.jp/products/edfc5.html

Before purchase, please check the vehicle model, engine model, drive system, year, grade, etc. on the car verification and cotion plate, etc., and make sure to check the manufacturers website for the correct fit.
Please note that the posted image is a sample, actual shape, color, and component components may vary slightly.

Safety Warning

Not compatible with EDFC ACTIVE PRO Motor Driver (EDC01-P7370) Always use EDFC5 Motor Driver (EDC01-R6654) This may cause damage

From the Manufacturer

TEIN EDFC5 Controller Kit

Description

Device to control attenuation power in conjunction with the shock absorber installed in the car.

Detects changes in acceleration (jerk) and automatically adjusts the attenuation force to predict vehicle movement.

Jerk control developed in collaboration with Shawura Industrial University.

It combines sharp handling and a soft ride.

Compatible shock absorber (only compatible with shock absorber from the same manufacturer)

Genuine shape shock absorber: EnduraPro HC PLUS, EnduraPro PLUS SP KIT, EnduraPro PLUS

(Street car height) RX1, 4x4, DAMPER SPORT, STREET ADVANCE Z4, FLEX A, FLEX Z, STREET FLEX, STREET ADVANCE Z, STREET ADVANCE.

Sports car height: MONO RACING, MONO SPORT, SUPER RACING, SUPER DRIFT, RACING FLEX

Shock Absorber is a part that is built into the suspension of the automobile, and absorbs shock from the road and stabilizes the body.

Attenuation Force is the power to control the spring extension and reduce vibration.

A motor kit (sold separately) is required for each vehicle to install.

If you cannot check the speed signal or you want to use all functions, a GPS kit (sold separately) is required.

Depending on the car model, a strut kit or motor extension kit is required.

Main operating mode

• Automatic jerk response adjustment
• Automatic adjustment of the speed of the deceleration of the G and swivel G-sense.
• Automatic car speed adjustment
• AI Learning Function
• Manual
• Total control of 3 modes (automatic jerk sensory adjustment, speed of deceleration G, automatic rotation G-sensory adjustment, and car speed response to automatic adjustment).

Product Description 1

Jerk (JERK) Automatic Adjustment

Detects the amount of G changes in advance and predicts the vehicle movement.

Automatically adjusts the attenuation force when the curve, acceleration and deceleration begins.

The self-adjusting program can be set freely to reduce the occurrence of overshoot of the swivel load.

Overshoot is a phenomenon that the pressure is increased than the set number.

Images are for illustrative purposes only.

Automatic adjustment of the speed of the deceleration of the G and swivel G-sense.

Automatically controls the decay force by detecting the G size caused by speed of deceleration or cornering etc.

Prevents the phenomenon of the front and rear wheel slipping.

Automatic car speed adjustment

Automatically control the attenuation force according to the speed of the car.

Controls attenuation power at low speeds and increased attenuation power at high speeds

AI Learning Function

AI learns the driving trends

Product Description 2

Manual Mode

You can adjust the front and back attenuation force to any number of steps according to the situation.

Memory function can record up to 10 patterns.

Images are for illustrative purposes only.

Total control of 3 modes.

You can mix and match the 3 modes: automatic jerk adjustment, speed of adjustment, speed of adjustment, and rotation G-sensing automatic adjustment.

Quiet

Reduces operating noise by approximately 1/3 compared to conventional products and improves quietness.

Wireless Control

Wireless control that connects wirelessly between the motor driver unit to the controller unit.

Simplify installation wiring and easy installation.

Product Details 3

Selecting the decay force adjustment level

There are 4 types of attenuation force adjustment levels: 16 levels, 32 levels, 64 levels, and 96 levels.

The 16-level adjustable shock absorber has been changed to 32-level modes for more detailed adjustments.

Images are for illustrative purposes only.

LCD Screen Visibility

VA panels provide high visibility during driving.

Automatically adjust the lighting brightness according to the ambient brightness

The light color can be adjusted to 4 default colors (white, green, amber, blue) as well as any color.

Controller

Compact size takes up little space to install.

Features a large display for easy visibility.

Product Size (H x W x D): 1.6 x 3.9 x 0.8 inches (40 x 9

Back of the controller

There is a wiring groove on the bottom of the back, making it easy to maneuver the wires.