Please confirm the length of your car caliper
The largest dimensions of the rear cover: 7.5 x 2.2 x 1.6 inches (190 x 55 x 40 mm) (small).
Front cover largest dimensions: App 9.4 x 2.6 x 1.8 inches (240 x 65 x 45 mm) (medium)
Maximum front cover dimensions: App 11.0 x 3.0 x 2.4 inches (280 x 75 x 60 mm).
Mid and small (9.4 inches (240 mm) + 7.5 inches (190 mm)
Big and Mid Size (270mm + 240mm)
PS: More products for caliper contact us carefully.
Note:
The largest dimensions of the rear cover: 7.5 x 2.2 x 1.6 inches (190 x 55 x 40 mm) (small).
Front cover largest dimensions: App 9.4 x 2.6 x 1.8 inches (240 x 65 x 45 mm) (medium)
Maximum front cover dimensions: App 11.0 x 3.0 x 2.4 inches (280 x 75 x 60 mm).
Installation Guide:
1. Remove wheels and clear stock caliper housing.
2. Apply a few silicone adhesives between the caliper cover kit and caliper housings (durable to use high-quality silicone adhesive) at high temperatures.
Figure 3 installs the caliper cover kit to the caliper housing.
4. Move the caliper cover kit in the right position and secure it with temporary paper tape.
5. Apply an internal high temperature resistant silicone sealer to the outside of your existing brake caliper (glue should not touch the brake pad) and hold in place for 2-4 hours (ex. below).
6. Silicone adhesive can be dry.
7. Rotate wheels to check clearance with reconnect wheels.
8. You are done!