[Backlight]
This product is a multi-functional water pen product that can measure pH pH, TDS solubility, S.G specific gravity, ORP oxidation reduction potential, EC conductivity, salt and temperature. This is a high performance, pen design and fast value waterproof water quality inspection pen. Stability and accurate results
IP67 waterproof grade, can be dropped in the aquarium, more convenient to use. The probe is interchangeable, automatic calibration, high precision, reliability, and easy to operate. Backlight Support, 5 minutes auto power off function, lightweight, compact, convenient to carry.
Includes 2-point automatic calibration (3-point calibration is also possible), and automatic temperature compensation. Dip the electrode in the PH (6.86, 4.00) standard solution and press the CAL button to automatically calibrate. pH: 3 Point Automatic Calibration (6.86 and 4.00 & 9.18 pH); TDS: 1413μS/ cm; EC: 1413μS/ cm.
EC
Conductivity Test Range: 0-10,000us/cm, 10.01-19.99mS/cm, 20.1400.0mS/cm (automatically converts range)
Resolution: 1uS/cm; 0.1mS/CM;
Accuracy: ±2%F.S.
TDS
Solution: Test range: 0 - 10,000 ppm, 10.1 - 200.0 ppt (automatically conversion ).
Resolution: 1ppm; 0.1ppt
Accuracy: ±2%F.S.
Salt
Saltwater Salt Range:0-1000ppm, 10.1-200.0ppt,
Food Salt Range: 0.01%-25.00%
Resolution: 1ppm; 0.1ppt; 0.01%
Accuracy: ±2%F.S. ; 0.01-5.00%(±0.1%): 5.1-25.0%(±1%)
PH
Range: 0.01 - 14.00 sq.
Resolution: 0.01 pH
Accuracy: ±0.05
ORP
Oxidation Reduction Potential Range: ±999mv
Resolution: 1 mv
Accuracy: ±2 mv
S.G
Saltwater Specific Gravity Range: 1.000 -1.222
Product Specifications:
Waterproof level: IP67
Temperature: ATC 0-60°
Operating Environment: 0-60.0℃(32.0-140℉); RH 100%
TDS coefficient: 0.5
Temperature range: 0.1-60.0C 32.0-140°
Temperature accuracy: ±0.5
Temperature Resolution: 0.1°C /°F
Auto shutoff: 5 minutes
Display: LCD digital display
Backlight: optional backlight
Note: Please clean the electrode after use.
Battery: 3 x 1.5 V (LR44).
Screen Size: 1.3 x 0.9 inches (33 x 24
Dimensions Weight: 7.2 x 1.5 x 1.5 inches (183 x 37 x 37 mm)
Water quality measurement/PH measurement/TDS measurement/EC measurement/ORP measurement/Salt measurement
1. Remove the protective cover and switch it on.
2. For those who want to use EC/PH/TDS/ORP/Salt Meter Mode, press the "Switch and MODE/CAL" button to switch between modes.
3. Remove the titanium probe in water
4. Slowly stir the water quality measuring device to eliminate the bubbles attached to the probe.
5. Press the "HOLD" button in about 10 seconds to lock the stable number, lift the measuring instrument, and read the measurements you have measured.
6. Press the switch off button to wipe the probe and youre done.