[Fixed 1.5m Winding 39.4 ft (9 m)]
Breaking Load 4t
A 2.0 inch (50 mm) wide lashing belt with I-hooks on both ends of the belt for use with rope hooks. Use on flatbed trucks.
Breaking Load 4t
A 2.0 inch (50 mm) wide lashing belt with I-hooks on both ends of the belt for use with rope hooks. Use on flatbed trucks.
This ratchet buckle type belt can be used to secure all kinds of luggage and prevent cargo from collapsing.The material is made of abrasion resistant polyester, which is water and weather resistant.Even with small force, you can easily and quickly tie down large loads to increase your work efficiency.
|
|
|
---|---|---|
Ratchet BuckleL: 7.7 inches (195 mm), W1: 2.1 inches (53 mm), W2: 3.7 inches (93 mm), H: 2.3 inches (58 mm). |
HookL: 7.1 inches (180 mm). |
|
|
|
|
|
---|---|---|---|
Double safety lock for increased hazard prevention.If you fasten the ratchet buckle to secure the luggage and tighten the ratchet buckle, there is a risk of the handle opening. The double safety lock is designed to prevent the handle from being opened without pulling the lever on the handle, so you can expect a very high danger prevention effect. |
Belt stability: Belt width: 2.0 inches (50 mm)Made of 100% polyester yarn, it has low stretch and is very durable. |
Cargo Scratch Resistant Buckle ProtectorRatchet buckle bottom to prevent damage to your luggage during bonding. |
Removable handle gripThe grip on the handle can be detached according to the usage situation. (Design: No. 1528743) |
|
|
|
|
---|---|---|---|
Step 1.Hang the hooks on both ends.Pull on the side belt until there is no loose on the belt on both sides. |
Step 2Hold the lever in the middle of the ratchet buckle. |
Step 3.Pull up the handle while holding the lever. |
Step 4.Repeat the handle to tighten the belt.(release the lever) |