Feature

●Suitable for bonding various combinations of vinyl chloride products, polyester, tetoron, ABS resin, and more. ]
●Do not expose to fire (Class 4 1 Petroleum) (Hazard Grade II)
●Brush on cap
●Ingredients: Methyl, Ethyl Ketone (30-40%), Toluene (5-15%)
●Weight: 1.1 lbs (0.5 kg)
●Weight: 1.3 lbs (0.6 kg)
●[How to use] - Removes dust, rust, dirt, oil and moisture from the adhesive surface. ■ Apply uniformly on both sides of the adhesive surface, dry to a degree of non-stickiness (3-8 minutes at 20 degrees Celsius) before pasting, and crimp with rubber rolls or fingers. ■ For materials with high suction, apply once to dry, and apply again before applying it
●During painting or drying, please ventilate it and do not inhae vapor. Please ensure that the lid is on and store in a certain location below 104°F (40°C)


Description

Suitable for bonding various combinations of vinyl chloride products, polyester, tetoron, ABS resin, and more.

Keep away from fire
(Class 4 First Petroleum)
(Hazard Grade II)

Brush on cap
Ingredients: Methyl, Ethyl Ketone (30-40%), Toluene (5-15%).
Weight: 1.1 lbs (0.5 kg).
Weight: 1.3 lbs (0.6 kg).

■How to use
Removes dust, rust, dirt, oil, and moisture from the adhesive surface.
Apply uniformly on both sides of the adhesive surface, dry to a degree of non-stickiness (3-8 minutes at 20 degrees Celsius) before pasting, and crimp with a rubber roll or finger.
For materials that have a lot of suction, apply once to dry, and apply again before applying it.

During painting or drying, please ventilate it and do not inhae vapor.
Please ensure that the lid is on and store in a certain location below 104°F (40°C).