Feature
●Abrasive grain: CBN (Cubic boron nitride)
●Grit size: #180 #1000
●[φ200] #180 5/8 inch (15.88 mm) shaft only body diameter: φ8.0 inches (203 mm), body width: 1.3 inches (32 mm)
●[φ150] #180 0.5 inch (12.7 mm) (2/1 inch) Shaft Diameter: 5.9 inches (150 mm), Body Width: 1.0 inches (25 mm)
●[φ200] #1000 15.88 mm (5/8 inch) shaft only body diameter: φ203 body width: 32 mm
[φ150-#180]
[φ200-＃80]
Description
CBN grinding wheel specialized in polishing hardened steel.
It can be attached to a general purpose double head grinder, and has excellent features such as the following:
The side parts are electrodeposited and can be sanded on flat surfaces.
Extremely low heat during polishing, and will not damage the cutlery.
Electrodeposition type, so the whetstone does not wear out, and does not require dressing.
No need to worry about accidents caused by cracking whetstone.
Can be used for a long time if used in appropriate conditions.
Minor of dust and sparks occurs during polishing.
Choose from 150mm (#180), 7.9 inches (200 mm) (#180, #180, or #1000).
[Note]
Since it is a wide type, you may need to remove the whetstone cover to attach it to the grinder.
There may be unevenness in color on the grinding grain, but this is not a quality problem.
There may be holes on the surface, but it is intended to adjust the balance.
This is not a problem for use. Thank you for your understanding.