Feature
●By utilizing the mode function, you can stop unnecessary barking and train your dog with high efficiency and precision. The three modes are all within a safe range, so the collar prevents unnecessary barking that is harmless to your dog
●The remote and collar receiver are designed for power-saving function, and pet safety first. Remote turns on with blue LED backlight and displays on a blue LCD screen for easy viewing. If your dog doesnt hear wasted barking or saying, just press the button to fix your dogs habit. In addition, depending on the actual circumstance of your dog, adjust the strength from the lower stage to a little bit. Easy to use even for beginners who dont like machines
●This collar receiver is very environmentally friendly. The charging port has a rubber cover and uses waterproof material. You can use it without worry even in rainy days. Whats more, it is remote control operated, so there is no interference and can communicate up to about 98.4 ft (300 m) longer, and it can prevent accidental operation. Rechargeable and energy saving, easy to charge with included cable
●The collar is adjustable and has a wide range of applications, from small to large dogs (up to 21.7 inches (55 cm)), so your dog can be worn with any type of dog (6 months and up). Do not use after surgery, diseases or bad health conditions
●If you have any questions or concerns, please feel free to contact us. One year warranty, free exchange within one year
Description
Note: If the receiver does not respond even when you press the button on the remote, please pair it together. How to Pair: Step 1: Press and hold the power button on the back of the receiver for more than 3 seconds, the blue light will flash."Pairing Mode ON" Step 2: Then press the "Mode button" on the transmitter at least 10 seconds. Mode Button: Shock Mode, Vibration Mode, Beep Sound Mode. Step 3: Then you will hear a bee again.Then pairing is complete.
Preparation for use
Preparation for use
1. First, charge the receiver(receiver), remote control (transmitter).
2. Open the waterproof rubber cover on the back of the receiver, insert the included charging line and start charging.
3. The charging port on the remote is located below.
4. Read and observe all precautions.
Please refrain from charging with the power on while charging.
Please be sure to close the rubber waterproof cover firmly after the receiver is fully charged.
How to pair
How to pair
1. Press and hold the power button on the back of the receiver for more than 3 seconds, the blue light will flash.Pairing Mode ON.
2. Then press the "Mode button" on the transmitter at least 10 seconds.
Mode Button: Shock Mode, Vibration Mode, Beep Sound Mode.
3. And it will be beeping.Then pairing is complete.
How to use the remote control
1.Lightly press the button to turn on the remote control (press any button is OK).
2. Mainly there are 4 function buttons to choose the appropriate mode from each other.
1. Light mark: If there is no light enough, please use it in an emergency.
2. Electrostatic shock mark: Use when applying current to your pet (level 1 - 100 selectable).
3. Warning sound mark: Use when giving a warning sound to your pet (level 1 - 100 selectable).
4. Vibration Mark: Use when applying vibrations to your pet (level 1 - 100 selectable).
3. Press +/-to set the level.
4. The remote will automatically turn off if you dont operate it for 1 minute.
5. Press the button if you want to reactivate.
How to use the receiver
1. After charging, make sure the rubber waterproof cover is tightly closed.
2. Press the power button for about 3-5 seconds to power on.
3. Power off is the same, press the power button for about 3 to 5 seconds to power off.
4. Pass the included belt through the receiver and adjust it to the appropriate size for your pets neck.
If the power supply is low, the receiver cannot be started.
Note:
Before use, please read the instruction manual and pair it before using.
Please be aware that the receiver may not react if not pairing.