|
|
|
---|---|---|
Equipped with a high-performance 32-bit M4 microprocessorThe XR10 PRO G2S has implemented a "High Performance 32-bit M4 Microprocessor" for handling complex data ultra-fast and accurate, providing a very fast and accurate response. Hardware, combined with cutting-edge software ensures the best performance for high end racing. |
Battery Reverse Polarity Internal Protection CircuitBuilt-in battery reverse polarity internal protection circuit, even if + and - are reverse connected during battery installation, it is equipped with circuit to prevent internal circuit damage.(Note: The use of non-polarized capacitors (30840004, 30840005) will be more likely to protect ESC damage.By only damaging the capacitor, it is easy to prevent internal substrates. |
New protocol allows smooth setting changes and firmware upgrades.Improved firmware upgrade speed and communication speed of LCD Program Box V2 and OTA Programmers is greatly increased. The settings change is compatible with "30502001 LCD Program Box V2" and "30850400 OTA Programmer". |
|
|
|
---|---|---|
Fine adjustable PWM frequency"Customized PWM (Drive & Brake) Frequencies" can be adjusted between brake frequencies "0.5KHz ~ 16KHz" and drive frequencies "1KHz ~ 32KHz" to accommodate various circuits and road conditions. |
Optimized programThe new program comes with 3 types: Phase-AC Swap, Initial Throttle Force, and Drag Brake Rates.(Please check the instruction manual for details) Note: Please use the program settings in an appropriate setting that does not take too much load. Abnormal heat generation of ESC and motor may be significantly mistaken in the setting and may result in damage.Please be careful. |
101% to 150% extra brake functionWith the maximum brake value of 101% or more, you can set the brakes stronger. Please set excess settings with care to increase the possibility of damage to the gear. |
|
|
|
---|---|---|
New feature drag brake rateDrag brake rate is used to control the response speed of the drag brake. By setting the appropriate value, you can use the drag brake more effectively.Adjustment width is 1 to 20, and the higher the response speed is faster. |
Built-in BEC standard equipmentBuilt-in BEC supports high voltage such as HV servos Adjustable from 5.0 to 7.4 V (0.1 V step). |
SOFTING FEATURES (HOBBYWING patented technology)The softing feature allows you to fine-tune the bottom end, allowing you to draw out the power of the high-power motor used in the modify efficiently and smoothly. |
|
|
|
---|---|---|
Easy to change settings with smart phone and OTA programmerWhen using the OTA programmer you can use the "HW Link V2 App" to change settings, updates, and settings information can be saved. |
Easily check real-time dataYou can change real-time data and other settings by connecting the OTA programmer. Note: The Bluetooth transmission distance of the OTA programmer is recommended within 5m radius.Please be aware that depending on the usage conditions and equipment may affect the distance fluctuation and transmission speed. |
|