YEP 40A Amplifier (2-6S) for Brushless SBEC Hobbyking
Hobbyking YEP 40A (2-6S) SBEC Brushless Speed Controller
Features:
Powerful 5.5V/5A Switching BEC
Optional programming card for convenient setup
ESC had separate programming lead built-in so there is no need to
unplug from RX
Super fine throttle resolution provides first-rate and highly
accurate linearity
Super smooth adjustable start-up mode
Constant RPM mode (governor mode)
Adjustable F3A brake.
3 steps adjustable normal EMF brake
High anti-interference capability
Low voltage cut-off protection with automatic adjustment for
NiCd/NiMH/Li-Ion/LiPo/LiFePO4
Soft cut-off option at low voltage, slows motor RPM gradual rather
than hard cutoff (LVC)
Low voltage cut-off can be disabled
Variable cut-off voltage / cell
Active free-wheeling circuit allows for unlimited "partial load"
capability
LED status display
Adjustable motor timing from 0° to 30°
Blocked rotation protection (senses a jammed motor and stops motor
rotation)
Motor reversing from ESC (no need to change ESC/motor wires)
Over-temperature protection and overload alarm
Throttle signal loss protection. If the signal is lost for 3
seconds, the power will automatically cut-off.
Safe power-on. (Motor will not start until throttle is returned to
Low position)
***This ESC is compatible with both helicopter and airplane models.***
Specifications:
Continuous: 40A
Moment: 50A for 10 seconds
Voltage: 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery
BEC: 5.5V/5A Switching BEC
PWM: 8-16 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 2.0 x 1.0 x 0.5 inches (50 x 25
Weight: 43g (including wires)