Removes oxidation on soldering iron tips.
Does not contain ammonium phosphate, so there is no corrosion due to flux residue (JIS-Z-3197)
Can be recoated on soldering iron tips.
Chemical paste suitable for removing oxidation on soldering iron tip
Also useful for recoating soldering iron tips.
|
|
|
---|---|---|
The tip of the soldering iron should be approximately 350 degrees Celsius (350 degrees Celsius). |
1. Black oxidation soldering iron tip |
2. Soldering with FS-100 |
|
|
|
---|---|---|
3. Clean the leftover FS-100Use a cleaning sponge or cleaning wire. |
4. Make sure the soldering iron tip is soldered.Repeat steps 2, 3, and 4 times until the solder is turned on. |
Soldering finishTo prevent oxidation, please put the solder on the tip of the soldering iron before finishing. |