Feature

●※Please be aware that returns, exchanges, or cancellations cannot be accommodated after an order has been placed. ※This is a made-to-order product, so please contact us for delivery date. The stock status and estimated delivery date are not guaranteed. Due to the variation in stock status, the actual delivery date may be delayed


Description

■Features
Widely used in both residential and building facilities.
This is a traditional wiring device that is safe and easy to use.
A switch that allows you to comfortably control the lighting and ventilation fan in a variety of living situations.
This is a set of switch body, switch control plate, mounting frame, and plate.
Use with compatible plates.


Guide Switch:
The light will light up when the switch is turned off and displays the position (orange)

[Check Switch]
The light will light up when the switch is turned on and prevents forgetting to turn it off (red).
The lamp will not light up if you choose a pilot switch that fits the load capacity.

Manufacturer: JIMBO / Shinkboelectric
Series Name: J Wide Series Electronic 6-Hour Timer Switch

Rating:
[Upper Level] 1.5A - 100V (with operation indicator light)
Lower Level: 15A 100V AC (with position indicator light)

Timer operating time: Approx. 10 minutes, 20 minutes, 30 minutes, 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours.

Compatible Load
Incandescent Bulb: Minimum Wattage 2W Max Wattage 150W Fluorescent (High Power Factor): 10W Minimum Wattage 100W Maximum Wattage 10W Fluorescent Lamp (Low Power Factor): 10W Max Wattage 65W Fluorescent Light Bulb (Inverter Shape): 10W Max Wattage 65W Ventilation: 2W Minimum Wattage 100W Max Wattage
Please note:
This product requires installation by an electrician.
General consumers who do not qualify for installation and replacement work is not legal
※Please be aware that returns, exchanges, or cancellations cannot be accommodated after an order has been placed.
Cannot be used with HID lamps (high intensity discharge lamps).
If the wiring is accidentally or the load side is short-circuited, overcurrent, the internal components will be damaged and unusable.
When performing mega tests, please remove the device from the electric furnace to measure between wires.
You can leave the wires (train) and the ground in installed.
Please test breakers on the load side before installing the equipment. Break in an instant short circuit.
Please do not use parallel wiring with mechanical switches as they constrain the display and timer function.
The shape is 3 modules.

Switch Wall Switch Embedded J-Wide Combination Set