[teal]
1. DC IN: DC 9V power input interface.
② Sustained Knob: Control the level of the compressed signal.
3. Attack Knob: Control the attack time of compressed signals.The smaller the value, the faster the attack time and the larger the attack time will be longer.The range of specific Attack parameters is determined according to the specific circuit parameter values.
4. Level knob: Control the volume of the entire effect output.The knob is at the 12 oclock position to maintain balance the input and output volume.
5. Limit Knob: Control the input signal entering the compression and generate a limiter.If the input signal is too large and no unwanted signal distortion, you can use Limit to reduce the input signal and keep the signal clean.
6. Tone Switch: Control the brightness of the compressed output tone Nature state is the original circuit parameter value, basically does not change the brightness of the tone, keeping the original input and output sound consistent; Bright state adds high frequency to the output signal to meet the needs of funky style users.
7. LED indicator: Displays the switch status of the effector is turned on and off (white) and controls it with the pedal.
8. Input : 1/4" TS outlet 9 Output : 1/4" TS exit outlet
1 Pedals: Control the on/off status of the effect; press to activate the effect, the LED will light up, press it again, the effect will be off, and the LED turns off.
Input | 1/4 inch (6.3 mm) mono terminal |
Output | 1/4 inch (6.3 mm) mono terminal |
Input impedance | 1Meg Ohms |
Output impedance | 470k Ohms |
Bypass Option | True Bypass |
Power Supply | AC adapter (9 V DC / Negative Center) |
Current | 50mA |
Dimensions | 112*60*31 mm |
Weight | 9.5 oz (260 |