●High precision anemeter: Wind speed range: 0.3 - 45 m/s (accuracy: +/- 3% + 20 rd); Temperature range: 0 - 45 °C; Resolution: 0.01 m/s. Measures wind speed at max, min, max 2/3, current Display in 5 increments: m/s, km/h, ft/min, Knots, mph ●[Air Flow Area Settings] Press the "AREA" key, then press the number key to enter new duct area such as number 1 or 2, and press the ENTER" key to confirm it. Use the "UNIT" key to select CFM or CMM ●Multi-functional wind gauge: 1.8 x 2.4 inches (4.5 x 6 cm) large display with backlight is easy to read. Data retention, ℃/℉ switchable, extendable and adjustable blades, holds 600 group data Comes with a carrying case for easy portability ●(CFM CMM Air Flow Measurement) Air Flow Range: CFM 0-999900 m3/min. Air flow measurement requires a cross-section, and the AP-846A can measure the airflow unit directly, CFM and CMM are interchangeable. Good and stable air flow meter speed for measuring HVAC, air blower and duct wind speed ●【Energy saving function】Low power indicator, manual or automatic power off after 5 minutes without operation. Comes with a 9V (6F22) battery, AOPUTTRIVER comes with a 2 year warranty. If you have any problems with the product, please contact us. We will replace it
[AP-846A]
Description
About the wind dynamer!
Technical Indicator
Wind speed range: 10.8 - 14.2 ft (0.3 - 45 m/s).
Wind temperature range: 0 - 45 degrees Celsius
Air Flow Range: 0 - 999900 m/3 min
Wind Speed Accuracy: ± (3% rdg + 20dgts)
Wind temperature accuracy: ±1℃
Resolution: 0.01m/s; 0.2°C
Features
✔ Switch between temperature units
✔ Data Recording (600 Sets)
✔ Real-time measurement
Introduction
AP-846A
In addition to the ability to measure basic wind speed and air flow, all other new features such as backlight, data recording, are developed to meet your needs and provide a better service experience.
Features
✔ Backlight
✔ Manual/Auto Shutdown
✔ Switch wind speed units
✔ Max/Min/Average/Current Wind Speed
✔ Data Retention
Details
Buttons
1. Wind speed key
2. Max/Min.
3. Air duct area input and sampling time setting
4. Data retention
5. Wind speed unit
6. Temperature Units
7. Backlight
8. In "READ" mode, reset button / clear recording.
9. Record the measurements
Backlight
This product has data retention and backlight function, it can be used without any combination of two function keys, very convenient to operate.
If you want to hold data or need to turn on the backlight function, simply press HOLD and LIGHT buttons respectively.
Battery replacement
Open the battery cover, take out the old battery, replace the new 9V battery (pay attention to the polarity of the battery) and close the battery cover.
Wind Speed Sensor Handle/Connection Wire
The handle of the wind speed sensor is longer.
The lower line is the connection line between the main unit and the wind speed sensor.
Where to Use: In many outdoor sports, the anemometer plays a very important role and for example, it is very important to measure the wind speed when you go climbing or flying kite with your family and friends.
drone
Airplane
Shooting
Product Information
Battery: 9V (6F22) x 1.
Size: 6.4 x 3.3 x 1.4 inches (163 x 85
Weight: 11.8 oz (320 g) (not including batteries).
Accessories: Main unit x 1, 9 V battery x 1, Japanese instruction manual x 1, Protective bag x 1.