Feature
●For daily inspection of tire air pressure; Check whether the air pressure is maintained (whether the air pressure is reduced) to prevent lower fuel economy
●Product Number: 4949 (Package Specifications of Amon 6778)
●Specifications:
●Maximum measurement value: 500 kPa
●Air adjustment (decompression) / measurement value retention mechanism included
●360 degree rotating base and hose included
●Air pressure unit: 1 kgf/cm2 = 98 kPa
[with rubber protection black normal product]
[Case included Regular item]
[With rubber protection red limited value]
[Rubber protection black limited deal]
[Storage bag included Light grade]
[Soft Case Included Standard Grade]
[Hard case included Premium grade]
[Includes case limited value]
[Pencil Type]
Description
商品紹介
■ For daily inspection of tire pressure.
■Base can be rotated 360 degrees.
■ With a retention mechanism for measuring values.
- Air adjustment (decompression) is possible.
■ Reset mechanism for measurements
使用上の注意
製品の仕様は予告なく変更する場合がございます。
From the Manufacturer
Tire maintenance "air pressure"
How to inspect tire pressure?
Tires are an important part of the car ride.Daily tire maintenance.
Use an air gauge when measuring tire pressure.
Check air pressure
The specified air pressure of the tire is written on the opening part of the drivers seat door, etc. with a sticker as shown in the picture.
The display is for the original tire attached.
If the size is different from the indicated on flat tires or aftermarket wheels, please fill the specified air pressure according to the respective size.
How to Determine Air Pressure DIY Procedures
|
|
|
|
|---|---|---|
Check valve and remove capThe tire air (air) is inserted from the part (valve) as shown in the picture.Measure the air pressure from the valve part where the air is inserted. First, unscrew the valve cap to the right. Air will not leak if you remove the valve cap (excluding air leakage due to degradation of the valve core). |
Measure air pressureMeasure the base of the air gauge firmly against the valve. If you apply it lightly to the valve core will push the air out. |
Measurement completedYour measurement is complete.Add air if necessary. The photo is 180 kPa (1.8 kgf/cm2).To reset the measured value, press the reset button on the right hand index finger in the picture.The reset button can also be used when adjusting the air (decompression). |
