Feature

●Spoilboard is a disposable workbench that can be mounted on the table of your router. Not only will it protect your router table from damage, but it can also be used as a workbench for carving work
●Material: MDF It has less habits of warping and cracking that are unique to wood, high density and strength and durability
●Compatibility: Compatible with 3018 series CNC router kit
●Easy to use: Screw holes for clamping (6mm) are pre-installed. Works with most bench clamp systems (Installation Guide: bit.ly/3lyLNc8)
●Application: Used for cutting or carving wood. MDF spoilboard is used as a cutting base to prevent the CNC table from being damaged by cutting tools. Ensures stability of the cutting material and allows for more precise cutting


Description

0101
0202

Genmitsu Spoilboard for MDF 3018

Precautions

Make sure the MDF spoilboard is firmly fixed to the table of the machine.Please make sure the CNC material is firmly fixed to the table of the MDF spoilboard/machine.Otherwise, vibrations and chattering may cause poor accuracy.Also, the bit may be damaged.Do not use lubricants when using MDF spoilboard. We do not recommend using a sprayer, mist coolant or oil as the spoilboard may expand when wet.

Installation Instruction

m.media-amazon.com/images/I/91WEpL1EuQL.pdf

Specifications:

  • Material: MDF
  • Size:30cm x 18cm x 1.2cm (11-4/5x 7x 1/2)
  • Hole Diameter: 6mm

Installation Instruction

0303

0404

0505

Spoilboard preparation

Please verify that all parts are included when you receive the product. Compare the bottom of the spoilboard to the picture above.After checking and loosen 6 T-nuts slightly for accurate movement.

Installation

Then, align the T-nut side to fit into the slot of the CNC table. Please check the photos above.Green maru is the right direction, red is the incorrect direction.Tighten the hex screws with the spoilboard in place.(Note: Do not use too much force. Then each T-nut will rotate to lock in place and the spoilboard can be fixed to the CNC table.

Enjoy DIY

Then lift each corner of the spoilboard and check if all the T-slot nuts are properly secured to the table.The spoilboard installation is complete.Enjoy DIY!

06 07 08
T-Track 3018-PRO 3018-PROVer