Specifications:
Model: 4V210-08
Fluid used: Air (40 micron screen)
Working mode: internal guide mode
Lubrication: No
Working pressure: 1.7-7.0kgf/cm2
Maximum Pressure: 10.5kgf/cm2
Working temperature: 11-122°F (5-50°C).
Voltage Range: + 15%-25%
Power consumption: AC: 5.4VA, DC: 2.5W
Insulation: F Class
Service life: about 10 million times under normal use.
Maximum working time: 0.05 seconds
Protection class: IP65 (DIN40050)
Voltage: DC 12V/24V (optional)
Instructions:
1. Before use, check the components and check whether they are damaged during transit, then install and use. When installing, be careful to ensure the gas flow direction and nozzle are correct. For iInstalling, pay special attention to debug the whole machine whether the voltage meets the requirements. We recommend using manual device debugging before powering on debugging. Be careful of dust and install the muffler on the exhaust port is recommended.
5. When connecting pipeline, pay attention to the roll of the stop strip so that it does not exceed the edge of the teeth, and be careful to remove the pipe joints, metal particles, dust and oil contamination.
Package List:
1 x Solenoid Air Valve