Feature

●Flux (soldering accelerator) for sheet metal. Used before soldering copper, brass and tin plate (Flux treated with bonded metals)
●Flux treatment is required when soldering with "Resin-free solder".
●Remove dirt from the jointed part with paper sanding, etc., apply the flux, and then heat the joints well with the soldering iron. Rinse flux thoroughly with water after work.
●Capacity: 0.8 fl oz (25 ml); Ingredients: Zinc chloride, hydrochloric acid, ammonium chloride, water.
●*Flux for stainless steel is available separately.


Description

◆Detailed information
Product Name: Goot Sheet Metal Flux 0.8 fl oz (25 ml) BS-35 (Soldering Promoter)
Model: BS-35-01HJ
■Specifications
Capacity: 0.8 fl oz (25 ml). Ingredients: Zinc chloride, hydrochloric acid, ammonium chloride, water.
■ Usage
Flux (soldering promoter) for sheet metal. Used before soldering copper, brass and tin plate (Flux treated with bonded metals)
Flux treatment is required when soldering with "Resin-free solder".
Remove dirt from the jointed part with paper sanding, etc., apply the flux, and then heat the joints well with the soldering iron.
After working, rinse flux thoroughly with water.
*Flux for stainless steel is available separately.
■Caution
*Never swallow it. It is a serious danger to life.
*Use in a well-ventilated place to avoid inhaling vapor.
*Wear protective equipment such as masks, rubber gloves, goggles, etc.
*Wash your hands well after use.
*Keep out of reach of infants and children away from direct sunlight, high temperature and humidity.