Peewood Electric Tool PWL-455 Woodworking Lathe
Simple headstock with little breakdown. The thread size is 1" x 8 pitch, both the spindle taper MT-2 are US standard size to accommodate many accessories.
The diameter can be cut up to 12 inches (300 mm) and length up to 18 inches (450 mm).
The body, head, and wicker are all made of cast iron and made with a sturdy construction.
The belt can be replaced with 5 speed levels. Just open the covers on the back and sides of the headstock to loosen the belt tension and replace without tools.
The tool rest is 7.9 inches (200 mm) wide, and the tool rest stand can be fixed to any position without tools. Tail stock comes standard with a rotating center and the tip rotates with the material. You can install a drill chuck sold separately, and you can also drill a hole in the center.
Scroll and independent chuck are available separately. A must have for preparing dishes, bowls, vases and hot drinks.
If you attach an extension bed (sold separately), you can process up to 39.4 inches (1,000 mm) for long processing of chair legs.
Maximum processing diameter: 11.8 inches (300 mm)
Maximum processing length: 17.7 inches (450 mm) (max. 39.4 inches (1,000 mm) depending on the extension bed
Gears: 5 speed gear changing belt
Rotational Speed:
50 Hz 430/750/1150/1800/2800 times per minute
60 Hz 520/900/1400/2150/3400 times per minute
Spindle Size 1" x 8 Pitch
Headstock Taper MT-2
Tail Stock Taper MT-2
Motor Single Phase 100V 550W 50/60Hz
Product Dimensions (W x D x H): 36.6 x 7.9 x 16.1 inches (930 x 200 x 410 mm) (Width is maximum of tail stock, depth not including tool rest base).
Weight: 7.1 lbs (35 kg).
Standard accessories (not pictured) 80mm faceplate, drive center, rotating center, knockout bar, tailstock handle knob, spanner, 2 types of hex wrench