Introducing a set of 1 wire that is perfect for replacing handles and repairs.
Available in variations of normal wire and extended lengths (sizes from STD to 13.8 inches (350 mm) long for car models).
There are 4 outer colors in red, blue, yellow and green.
The inner wire is made of high quality domestic stainless steel wire that is resistant to rust and stretching. 7 double strands of high density wire, total of 49 strands,
The Taiko part is diecast jointed to achieve a tensile strength of 558.2 lbs (250 kg).
Teflon tubing inside the outer wire reduces friction coefficient for smooth movement.
★Industry first 1 year inner wire quality assurance★
If the inner wire breaks occurs for 1 year after purchase, we will replace the inner wire at no charge.
With a warranty card issued by our company, you can return the wires that are broken in the inner wire at the customer.
After confirming the wires, we will replace the inner inner layer and send it back at our own burden.
Buyers pay for the cost of removing wires.
[Note]
This product is for mounting wires in normal cab and normal throttle holder, and the specifications are according to the original wire.
If an external part is already replaced or modified it may not be possible to install it without replacing it with a normal part or modification. (Please check your vehicle before purchase)
Replacement parts may require brake hose replacement or extension harness kit. Please prepare them separately.
If you are unfamiliar with the replacement work of parts, we recommend that you ask a qualified automotive mechanic at a two-wheel specialty store.
Installation and instruction manual not included. Please refer to service manuals published by vehicle manufacturer and perform a replacement process.
Important information *Please be sure to check it. ※
We do not apply any warranty in the event of a defect.
If there is any problems that occurs from working by people other than a motorcycle shop (mechanics of the shop), we will not be covered by the warranty, so please ask your local motorcycle shop.
Also, if you contact us about the installation, we will not be able to answer any questions. If you have any questions, please consult your local motorcycle shop.
※事故防止の為、作業完了後、必ずボルトが締まっているか確認をお願いします。
※脱落防止のため各部分のボルトを増し締めして車体へ装着して下さい。