LCD display
![Thermometer/same clock wind gauge](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Mini Vane Anemometer Operation Guidance:
1. Turn on the power: Press the "Mode" button for 2 seconds to turn on the anemometerWind speed, temperature and battery icon are displayed on the LCD screen of the wind. LCD backlight lasts for 12 seconds.
2. Set the wind speed unit and measurement mode.Press the "Mode" button for more than 3 seconds until the "m/s" start blinking. Press the "Set" button to select the desired wind speed unit.Press the "Mode" button to check the unit. To set up MAX / AVG / CU mode, press the "Set" button several times until the CU / MAX / AVG blinks, then press the "Mode" button to confirm it.Settings are saved even when the power is turned off.However, after replacing the batteries, it will return to factory settings.Wind Speed Units: m/s, Km/hr, Fit/Min, Knot, MphMeasuring mode: CU: current wind speed, MAX: maximum wind speed, AVG: average wind speed.
3.Setting temperature unit:
There is a temperature switch key (℃/℉) hidden in the rear cabinet, you can use a small push pin to press the key to ℃/℉.
4. Backlight Display: Press any key to activate the backlight for 12 seconds.
5. MEASUREMENTS: When the weathervane (impeller) rotates, the LCD will instantly display wind speed, temperature, and beaufort scale.When the temperature is less than 0 degrees Celsius, the LCD will show "wind chill".
6. Turn off power: Press "Mode" + "Settings" button at the same time to turn off the unit.
7. Auto Power Shutoff: The unit will shut off without any operation for 14 minutes.
8. Battery replacement: If you see the empty symbol on the left side of the LCD, please replace the battery.