Function:
1 Polycarbonate shell, high mechanical strength, high hardness, corrosion resistance, rust free for long time outdoor use.
2. 8 display directions, high performance bearings, small rotational resistance, accurate measurement, more convenient and practical.
3 Small and lightweight, easy to carry and assemble with anti-magnetic interference processing, suitable for both 4-wire and 3-wire connections.
4 It features an internal smooth bearing system that ensures exposure protection, high impact strength, and information collection accuracy.
5 Widely used in the measurements of wind direction in greenhouses, environmental protection, weather stations, ships, terminals, breeding and other environments.
Specifications:
Condition: 100% Brand New
Item Type: Weathervane
Material: Polycarbonate
Parameter: DC Power (default) 10-30V DC Maximum Power Consumption Current Output 1.2W Transmitter Circuit Operating Temperature -20℃~+60℃, 0%RH-80%RH Measuring Range 8 Directions Dynamic Response Time ≤0.5sec Output Signal Current Output 4~20mA Load Capacity Current Output ≤600Ω
Calculation Method: 0-10V Output Comparison Table Output Value (V) Supported Wind Direction ≈0 Northern Wind ≈1.4286 Northeast ≈2.8571 Eastern Style ≈4.2857 Southeast Style ≈5.7143 Southwind ≈7.1429 Southwest Style ≈8.5714 Western 10 Northwest Wind
Power Wiring: Wide voltage 10-30 V DC power input
Product Size: Approx. 23.5 x 18.5 cm / 9.3 x 7.3 inch
Weight: Approx. 11.2 oz (317 g).
Please note that wind speed cannot be measured.
Common Problems and Solutions:
There may be no output or output errors:
1) PLC calculation errors may occur due to the range of responding errors. See technical indicators for range.
2) Wrong wiring method or wrong wiring order.
3) The power supply voltage is incorrect (24V power supply for 0-10V type)
4) The distance between the transmitter and the collector is too long, resulting in signal failure.
5) Damaged PLC Collection Port
6) The device is damaged. .we-texttable td, .we-text table th; ; we-text table
Package List:
1 x Wind Speed Sensor
1 x Cable
1 x Screw Kit (4 x Screws, 4 x Nuts)
Note:
1 Do not disassemble it by yourself or touch the sensor core to prevent product damage.
2. Keep as far away from high output interference to avoid inaccurate measurements of inverters, motors, etc. When installing or disassembling the transmitter must be disconnected first. The water in the transmitter can cause irreversible changes. p>
3 Avoid chemical reagents, oil and dust directly into the sensor, avoid prolonged use in condensation or extreme temperature environments. It also prevents cold and thermal shock.