Feature

●【Application】Flipsky ESC is based on VESA open source projects, compatible with VESA software. Advanced changeable electronic speed controller designed for DIY electric skateboard conversion
●Stability: The maximum continuous current is up to 50 A. It has temperature protection and current limiting protection, and supports multiple control modes. With Flipsky ESC, you can use a sensorless motor to achieve a smooth start but it may not be able to start with traditional RCESCs. It also provides strong, reliable and advanced electric brakes
●Set Contents: 1 x electronic speed control; 1 x USB cable; 1 x VESA sensor line; 1 x manual (English language not guaranteed). Note: By default, the LED button is factory inserted into the switch. Do not turn on the switch without connecting the LED button
●Product Specifications: Material: PCB board + aviation aluminum alloy heat sink + thermal silica gel + moss tube; EPRM: 60,000; Firmware: V3.40 (retaining the latest firmware version); PCB: 4 layers; PCB size: Approx. 1.57 x 2.36in; Current: Continuous 50A / Peak 240A, It is in the ambient temperature around the installation and the device Dependent; Voltage: 8-60V (Can be used with 3S to 12S Lipo and peak voltage should not exceed 60V! ); Bec: 5V@1.5A; BEC Type: Internal Driver Support; Time: Software Calibration; Motor Control Interface: PPM Signals (RC Servo), Analog, UART, I2C; Cut-off Voltage: Programmable; Frequency: PWM Input; Weight: Approx. 80g / 0.18lb; Fsesc4.12 Size: Approx. 110x40x2 mm / 4.20mm / 4.3 mm 6 x 0. 8in;Programming Card:No;Reverse:Yes;Motor Wire:12AWG;Power Cord:12AWG
●Quality Assurance: We inspect all our products before shipping. If there is a defective item due to manufacturing reasons, please contact us. We will try our best to solve your problem


Description

Function:
1 Small and exquisite, widely used and can be attached to a variety of products, small size, light weight, suitable for scooters, robots and other products.
2. Flipsky ESC is based on VESA open source projects and is compatible with VESA software.
3 Flipsky ESC is an advanced changeable electronic speed controller designed for DIY electric skateboard conversion.
4 With Flipsky ESC, you can start using sensorless motor, but you may not be able to start with traditional RCESCs. It also provides strong, reliable and advanced electric brakes.
5 The maximum continuous current is up to 50A, with temperature protection and current limiting protection, support multiple control modes.


Specifications:

Condition: 100% Brand New
Item Type: Electronic Speed Control
Color: as picture

Material: PCB board + aviation aluminum alloy heat sink + thermal silica gel + moth tube
Model: V4.12ESC Standard Configuration
Hardware: V4.12
EPRM: 60000
Firmware: V3.40 (retains the latest firmware version)
PCB: 4 layers
PCB size: approx. 40 x 60mm / 1.57 x 2.36in
Current: continuous 50A/240A, depends on installation around the device and ambient temperature
Voltage: 8-60V (3S