Feature

●Product Name: SOLINK SX-2 High Speed Plug-In Brushless Motor Long; Product Number: SLX-MT-002LBL; Color: Blue; Brand: SOLINK MOTOR
●Compatible with: various companies electric guns long motor models (M16A1, M16A2, M4, MP5, G3, MP5K, P90, 89 types, high-cycle MP5A5HC, G3SASHC, next generation M4, etc.)
●No-load rotation: 7.4 V = 24,000 RPM, 11.1 V = 36,000 RPM. No load current: 7.4 V = 2.3 A, 11.1 V = 2.8 A. Max torque: 7.4 V = 9.8 A, 11.1 V = V = V = 126.2 mN. , 11.1 V=30.7 mN/m
●■Important information when purchasing: There may be some scratches or pain due to overseas products. Please refrain from purchasing this product if you are looking for a complete product. Please note that the color of the actual product may differ slightly from the product depending on your monitor settings. ·Please be aware that this product is sold out at the same time on other sites


Description

[New generation motor with quiet and durable]

SOLINK SX-2 Medium Speed Plug-in Brushless Motor Long Compatible with long size motor models such as M4, MP5, P90.

Unlike the traditional brush motor with built-in brush/communitator, it is a brushless motor that rotates on a control board.

Compared to traditional brush motors, there is no brush/communator existing, this brushless motor has already become common in the radio control boundaries that are released from contact resistance, noise and maintenance. If you normally need power wires or sensor cables to switch phases, this product is built into the motor, so you can install it without any modifications such as switch wiring.

The position of the rotor and magnet is inverted, so the coil is extremely durable. Since there are no consumables such as brushes, the life of the case / tower bearing life will not be overpowered.

The absolute magnetic space is reduced from the brush motor, so if you need ultimate torque you will have military control on your brush motor (but it is only very expensive high-end motors...) it is not recommended for high cycle applications and light tune guns.

Terminal position is higher than a regular motor. Processing may be required depending on the model.
Due to the built-in foundation, it is recommended that you monitor the motor temperature. Please note that in environments above 176°F (80°C) may cause damage to the substrate.