If you are drilling wood holes, then this countersink drill is the best choice. In addition to installing hinges on fixtures, it is also useful for making wood dowels (wood dowels) for buried cone/recessed holes. Improve your work efficiency with this high precision countersink drill.
Product Specifications:
Material: HSS + brass
Size: 1/4+5mm
Weight: 2.1 oz (60 g) + 2.0 oz
Quantity: 2
【Package included】:
1/4 hole saw x 1
0.2 inch (5 mm) hole saw x 1
(Drill holes under countersunk and embedding screws)
The drill blade is built into a hole such as a hinge and slide the guide vertically into the hole and allow it to be opened. This hole saw can be used to drill underneath the countersink and embed the screws at the same time. Precise center exit for a screw fit and prevents any screwing.
Increases speed of work. ]
The drill blade is designed with a three-prong design that allows you to clean wood dowel holes. The drill can be firmly secured without the need for a fixed stand. Great tool for drilling wood and plastic
1/4" Drill - Fits 5.5-6mm Drilling
5mm Drill-Compatible with 6.8-7.3mm Drills
For mounting joints, handrailing
It is useful for installing joints, hinges, handrails, etc. and is great for professionals, do-it-yourselfers, DIY, cabinet repairs. Available in 1/4 inch or 5 mm - 2 sizes and can be drilled 6.35 mm or 5 mm for different purposes.
How to Use:
1. After installing the hole saw, secure the material of the target material with clamps, etc.
2. Mark the material makes it easier to work. Hit the center in advance with a poch.
3. Align the tip of the drill or impact driver with the marking point where the hole saw is positioned vertically.
4. Start drilling work. Rotate slowly at first, and gradually raise the speed (do not use with electric tools with high speed rotation (over 3000 rpm) ).
5. When you penetrate it, you are done.
【Precautions for Use】:
Please be careful not to keep your body close to the drill while rotating.
Do not use with high-speed rotations (over 3,000 rpm) electric tools.
Please be aware that if you cut more than the set screws, the wood debris may clog and break.
Please wear protective glasses. Work with clothing that will not expose your skin.
Please apply lubricant in advance. After use, please apply oil to prevent rust
When drilling screws, please use the optimum rotation speed according to the material.