VoIP Setup Manual:
1.Connect the PAP2 device to the router by network cable.The phone is also connected to the PAP2 device and connected to the power supply.
2. When the PAP2 device is activated, press the phone until the phone announces in English.Next, press 110#, the phone will report the address assigned by PAP2 devices on the router.Of course, the address assigned by each device is different and pay attention to phone prompt tone.
For example, an IP address assigned by the PAP2 of the router, is 192.168.1.102. Open IE and enter 192.168.1.102 in address.The following interfaces are displayed.
3. Next, find the management entry administrator login.Click the left button to find the next interface. The phone in the first line (2nd line is the second phone compatible with device phone 1 and Phone 2, the second phone is configured as the first one), enter the icon and input the server. IP address (This is provided by VoIP service provider)Enter your account number and password.
4. The most important step - After saving the settings, the VoIP is all set.
User Instructions:
1. We have broadband network+router+gateway+regular phone = domestic or international long distance calls and free global calls.
2. Available in Broadband Network+Router+Gateway+Phone Program Control Switch+Regular Phone = Domestic or International Long Range Calls and Free Global Calls
3. Cisco Dual Port Gateway has FAX function.Support SIP protocol
Model: | PAP2T-NA PAP2T |
DHCP: | Support |
SIP V2 protocol: | Support |
FAX & MULTI VOICE: | G.711, G.726, G.729, G.723.1 |
Standard: | IEEE 802.3, IEEE 802.3U |
Cable Type: | RJ45 Category 5 Twisted Pair RJ11 Standard Phone Line |
Basic Indicator: | Power, Ethernet, Phones (1-2) |
Network Protocol: | SIP V2 |
SECURITY FEATURES: | Key Management |
Weight: | Approximately 280g |