Product Description

The claws of the agricultural equipment can be replaced quickly.

Indications

This product does not have the ability to adjust torque. Therefore, this product may be too tight or lack of tightness.

Tightening this product is done until temporarily tightened, and use a torque wrench to ensure that the tightening torque is set according to the vehicle

Safety Warning

● Excessive tightening of wheel nuts will cause damage to hub bolts and thread damage. In addition, lack of tightening can lead to a serious accident, where the wheel nut will slip off while driving.

This product has a high tightening torque, so please be careful with this product

From the Manufacturer

AC 100 V Electric Impact Wrench for Agricultural Machines

FT-50P with long socket and extension bar for agricultural equipment

Product Size / Weight: Approx. 3.1 x 8.1 x 11.4 inches (80 x 205 x 290 mm); Approx. 4.4 lbs (2.1 kg) (excluding cords, sockets).

Accessories

17/19mm integrated socket 21mm Deep Socket 125mm Extension Bar

Anvil part dimensions: 0.5 inches (12.7 mm) (measured from the square of the socket mount).

Current: 3.5A

Power consumption: Rated 350 W.

Product Description

• Cord Length: Approx. 8.3 ft (2.1 m)
• Input Voltage: AC 100V
• Power Supply: Single-phase AC 50/60Hz
• Tightening torque: 250 Nm tightening time in 2 seconds (without splicing cord).
• Capacity: Bolt size: M10 - M14 (normal bolts)

How to replace the claws

Attach the sockets and extension bars of the same size as the bolts or nuts that hold the claws in place and remove the bolts or nuts that are secured by the claws.	Switch the claws and temporarily secure the bolts and nuts.	Use this product to temporarily tighten bolts or nuts.	Use a torque wrench to tighten bolts or nuts with defined torque.