Feature(may vary by option.)

●Bearing puller 3.0 inches (75 mm) type
●Size: Claw opening width (compatible bearing and gear diameter) about 10mm to 35mm
●The depth of the nail is about 1.6 inches (40 mm) from the shaft to the bearing
●You can tighten the nails with the included bolt, so you can secure the bearings. Very convenient construction for pulling out bearings in electrical parts, mechanical bearings, pulleys and auto parts
●Number of nails: 2

[75mm type]

[100mm type]

[150mm type]

[200mm type]

Description

Bearing Puller, Gear, Pullout, Bearing, 3.0 inches (75 mm) Type.

Thank you for visiting our product page.

Bearing puller 3.0 inches (75 mm) type.

Size: Claw opening width (compatible bearing and gear diameter) about 10mm to 35mm

The depth of the nail is about 1.6 inches (40 mm) from the shaft to the bearing.

You can tighten the nails with the included bolt, so you can secure the bearings. Very convenient construction for pulling out bearings in electrical parts, mechanical bearings, pulleys and auto parts.

Number of nails: 2

Instruction manual not included.