Tie rod end separator to remove tie rod ends from boots
Total Length: 6.1 inches (155 mm)
Insert Width: 0.9 inches (22 mm)
Lifting Amount: 3.1 inches (80 mm)
Tools Used: 0.7 inches (17 mm)
Weight: 3.3 lbs (1.5 kg).
■ Please insert firmly into the shaft of the tie rod end and use it.
■ If the product is severe sticking, tighten the bolt on the main body to a certain extent, and then remove it with a hammer to impact the back of the main body.
If you remove it to the end with the bolt on the main body side, it may cause it to crack.
■ Please apply grease regularly to the screw threads.
Note: Impact wrench cannot be used.