[Product Description]
riyabanpa- Replacement is a must have. Wide Tires, Aluminum Wheel is mounted, outside surface to for mounting. It would be ok
Please note
Spare Tire Dedicated accessories. supeataia and weight you get the same while wearing this product. Weight Gain due to potentially cause damages to genuine rear gate.
● Mounting Position plates get your newly reinforced ribs on the move. This allows the spare tire weight by running in the distant relief and strength are greatly up to.
* Body is constructed in mounting position for your plates and transport wheel and bracket. On the right move for 120 mm, 130 mm Travel (picture 1, 2,, 3). In addition, a bracket can be used to mount on the reverse and wheels move on to 105 mm (picture 4).
● tailgate rear direction can be adjustable between 110 to 140 mm from the surface. Wipers, uossya-nozuru stays on can be used. Wheel mounting screws M12 x P1 x 25.
■ Mounting Method is taking off Genuine bracket and left and right 2 six genuine taiyakusshongomu, move and install Replace the plates in place. This means that the right cushion rubber mounting hole, 1 locations usage as a stop in place. Remove the cushion rubber paste comes in a position, double sided tape etc. Hit the side wall of the tire to reuse.
■ Wheel with Bracket for back and forth direction adjustment, the wheel bracket close to your ear, more taiyakusshongomu and tailgate that can be firmly in the position in place. This product has the registration to adjust to fit using the butterfly screws so it is possible, adult mens power, and extremely strong fastening. Besides, the running back and forth – Its like that? Please make sure check the size chart. (The inside of your luggage will be responsible for driving the fall out so please be careful. (Not included)
* Please note if you are not use can be used depending on the type cover is made with genuine spare tire cover or covers, you need a process and monitor color settings.
<> About the registration
(軽自動車 inspection Association Office 相模 Kanagawa solution as confirmation)
● The Vehicle up to 20 years
(1) Wheel Bracket wearing the 軽自動車 protruding from the frame but the brackets, protruding part (split) The adjustment tools and without using a thumbscrew and removable for a continuous registration will be compatible.
(2) construction and change registration in the vehicle dimensions and weight can be of measuring and spare tire off when you take the protruding part of the Assumption and mounting bracket. (However, its a crime scene Judge of the inspectors. Roof Carrier etc. as well as you do. (Not included)
● 21 years later the vehicle (external regulated for bumps)
(1) when it comes to 20 years of the vehicles and the same 軽自動車 frame. For external regulated charged when youre out and about, make your spare tire condition, or your spare tire 恒常 and bumps while continuously registration will be right at your fingertips. However if you are, this is the wheel on the parts around the edge, hubs, wheel nuts, etc. Using the regulations applicable to bumps, make sure Spare Tire Cover is.
(2) construction and change registration in the vehicle up to the 20 years as well as remove the protruding part of the bracket. However, the external ridges and regulations for the inspection and so be sure to spare tire cover of your spare tire to the attached an inquiry.
* Please contact us to the 軽自動車 inspection Association of jurisdiction for more details.