[Black]

This item is brand new and comes with a 1Pictures are common images. Cross-linked polyethylene has been treated with a treatment of radiation and cross-linking agents, and the cross-linked reaction enhances molecular bonding as a three-dimensional netting structure and greatly improved heat resistance which has been the disadvantage of polyethylene. Today, it is a mainstream insulation material for plastic cables, and is used in a wide range of voltage from 600 V to 500 kV. Excellent electrical properties. High dielectric resistance, volume specific resistance, and very small dielectric direct contact and dielectric rates. High current allowable The maximum continuous temperature tolerance is increased to 194°F (90°C), allowing you to obtain a large power transmission capacity, and the temperature is tolerant at a short-circuit temperature of 588°F (230°C), and the short-circuit current is large. For this reason, short line and down wiring can be used with 1 - 2 sizes narrow cables for easy drop in the wall (within 22SQ for circuits that require 38SQ for VV). Excellent physical and mechanical characteristics. Excellent impact resistance, abrasion resistance, low heat deterioration, and excellent in low temperature characteristics. Excellent chemical resistance. Lightweight and easy to handle and fabric construction. Cross-linked polyethylene has a smaller specific gravity compared to vinyl chloride, and it has excellent insulation performance, so the insulation itself can be thinner. Therefore, if you use a cable of the same size, it is thin and lightweight and can be handled. Easy to connect. Weather resistant cores are inferior to vinyl chloride insulation. When exposed to cross-linked polyethylene parts of the insulated coating outside, deterioration is advanced faster than PVC insulated cables and wires. It may also cause insulation breakdown due to water trees. Therefore, in environments exposed to sunlight or light from lighting fixtures, UV protection is required with sufficient weather resistant black insulation tape. Furthermore, this UV blocking treatment is not required for VVR cables with PVC insulation. Stock Unit:m