[50mm]

[75mm]

[100mm]

Use an impact screwdriver to polish carbide products, glassware, ceramics, and knives.

[Use]
Polishing carbide products, glassware, ceramics, cutlery, etc.

Features:
Special coat that is difficult to get clogged during polishing, improves work efficiency.
The electrodeposited diamond coat on both sides, so you can use it twice as much as a value!
The granular size is changed between 400 on one side and 1000 on the other side, so you can polish it when polishing carbide and knives.
Attach the included bushings and use it for blade sharpening grinders (slow).

[Precautions]
Be sure to wear safety glasses while working.
Before using, please check whether the screw fixing the shaft and the sharpener part are tightened tightly.
Please use the drill as low as possible (very dangerous if used at high speed rotation).

From the Manufacturer

Strong polishing with an impact screwdriver and electric drill.

The special coating makes it difficult to get stuck during polishing. The electrodeposited diacoat on both sides is an electrodeposited diacoat. It can be used twice as long. Because the granularity of each side is different, you can attach the included bushing that can be used for polishing carbide products and knives, and it can also be used with a blade sharpener (low speed).

Sizes:

Outer Diameter: 2.0 inches (50 mm), Inner Diameter: 0.2 inches (6 mm), Thickness: 0.04 inches (1 mm), Outer Diameter: 3.0 inches (75 mm), Inner Diameter: 0.2 inches (6 mm), Thickness: 0.04 inches (100 mm), Inner Diameter: 0.06 inches (20 mm) (15 mm).

Use an impact screwdriver to polish carbide products, glassware, ceramics, and knives.

Specifications:

0.25 inch (6.35 mm) Hexagonal Shaft Granularity: 15.7 inch (400 mm) (Finishing Surface) 1000 Compatible Models: Electric Drills and Impact Drivers