Feature

●Length: 16.4 ft (5 m), 300 SMD LEDs
●Remote control function: Power on and off, color change, flash pattern change, flash speed change, brightness change, brightness change, number of LED chips adjustment, reception range approx. 12.8 ft (6.5 m)
●Flashing Performance: 358 types of flashing patterns, 12 levels of brightness adjustment, 10 levels of flash speed adjustment
●[RGB tape specifications] Width approx. 0.37 inches (0.95 cm), can be cut every 2.0 inches (5 cm) (3 LEDs) (not waterproof)
●AC Adapter Performance: AC 100 V, 50 Hz, 60 Hz, Voltage: 12 V, Maximum Current: 5 A


Description

Product Features:
RGB tape is a tape LED that allows you to position the light in a straight line.
The tape itself is soft, so you can bend the tape surface up and down.
There are 14 colors in total, and 358 different flashing patterns. Not only can it be illuminated in a single color, but also a mix of colors and
You can enjoy a wide variety of lighting patterns such as flowing arrangements.
Indoor lighting, online drinks, shop lighting etc.
Comes with double-sided tape for easy installation.
Can be cut every 2.0 inches (5 cm) (3 LEDs).
If you disconnect, please purchase a wiring remote control and controller set (sold separately).
The cut side is easy to light up.
You can adjust the number of LEDs to control and arrange flashing depending on the length.
It is not waterproof, so it is perfect for indoor use or in areas where it is not waterproof.
An original Japanese instruction manual is included for those who want to focus on the flashing pattern.

[Precautions]
In specifications, when 2 or more are used simultaneously, all LED tapes will interact with the remote control operations of the receiver. If you install 2 or more at a close distance, and you want to change the color of each one, please set it with only the RGB tape you want to set up.
This product is not waterproof. Use indoors or out of water.
Please do not touch the product with wet hands. This may cause electrical shock or malfunction.
Please take the power plug to plug and unplug the power outlet.
Open the controller, modify wiring processing, etc.
Please do not connect with other products. About the problems caused by modification
Not for use. Due to the performance of the AC adapter, the RGB tape can be used within 16.4 ft (5 m)
assumed. Please do not use this product differently from the specifications.
Do not light up the RGB tape while it is rolled in the roll. Becomes high temperature and may cause deformation, failure, fire, etc.
The LED is bright; please be careful not to look directly for a long time.
Before installing the product, please make sure all the LEDs are flashing before installation.
Also, do not over-twist. This may cause disconnection.
·Warranty range is only for the product. Any other installation fees will not be covered under the warranty.