Feature

●20 Sheets Heat Transfer Paper A4 (210x297mm) T Shirt Iron Dark Fabric Inkjet Printer Transfer Paper
●Film Dimension: A4 size (210x297mm)
●These transfer paper allow you to print your own designs on fabrics and textiles. Use a household iron or heat press to transfer text, images or photos to dark and black fabric.
●Compatible with all inkjet printers, such as Epson HP and Canon using regular ink. Sublimation and pigment inks are recommended.
●Heat transfer paper is designed for use with dark colored 100% cotton or poly-cotton blends.


Description

Operation Instructions:

First:Print
1.Printer setup For satisfactory printing results, we recommend choosing "Normal Paper Mode and Best Print Quality" mode. Then let it dry for about 10 minutes.
Cut out the image and leave a narrow 5mm border at the edge of the pattern.

Second:Decal
1. Preheat the iron. It takes about 2 minutes to set the maximum temperature.
2. Do not use steam function. You can also use heat transfer press machine.
3. Make the fabric completely smooth with a light iron.
5. Place transfer paper on textile with the printed image facing upward.
6. Apply grease proof paper to transfer film.
7. Iron the transfer film without pressure. Slowly swivels from end to end to heat up the transfer evenly to ensure even heat transfer. Overall Area
Dont forget the corners and edges.
8. Iron up to 2 minutes for A4 sheet motif.
9. Let the transfer cool for at least 1 minute, then peel off the oil proof paper with smooth and even motion.
10. If you do not use the same greaseproof paper, you can use the same oil proof paper several times. Ink remains.
Third:Washing

1. Do not wash the fabric within 24 hours after transferring.
2. Wash the textile with cold water or 30-40 degree centigrade water. Do not wash with strong alkaline detergent or bleach.
Do not rub the transfer pattern when washing your hands. Do not wring, hang dry is recommended
Do not dry clean
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.