Feature

●【Easy & Safety】Easy to use wireless remote control switch. Operating Voltage: DC12V-48V; Maximum Load: 10A
●【Widely Used】The remote switch is a wide range of applications, from simple household remote control to autonomous control. Wireless remote control switch can control light, motor, fan, lift device, entrance access, up-down controller, alarm system, garage door, electric door / lock/window/blind/car or other equipment
●Signal Stability: This RF remote control uses RF technology and stable signal. The wireless RF switch signals can pass through walls, floors, and doors to control the receiver from anywhere within a reliable distance.
●[Benefits] Wireless receiver controller with high confidentiality, stable performance, and low power consumption. Resists interference: Adopts omnidirectional wireless encoding technology, allowing independent control without mutual interference.
●【12v--48v for 2 Channel Wireless Control】We tested the transmitter and receiver to work together (working mode in momentary) and before shipping. Also, you can switch to 4 different modes as you need, instantaneous/toggle/latch/5 seconds delay time, it is very simple and convenient.


Description

About Receiver:

Model Number: AK-RK02S
Operating Voltage: DC12-48V
Static state: ≤6mA
Operating Temperature: -40 degree +80 degree
Receiver sensitivity: -105dBm or higher
Operating frequency: 315mhz
Output Voltage: DC and switch signal are optional
Max load current: 10A
Size: 8.5 x 5.7 x 2.6cm

How to work:
The operation method has changed by the model button.

Moment: Press the model button once.
Relay: Long Press->On; Release->Off

Toggle: Press the model button twice
Relay: Press->ON; Press the same button again->OFF

Latch: Press the model button 3 times
Relay: Press->ON; Press the other button ->OFF

5 Second Delay: Press the model button 4 times
Press the remote A button, the relay A will activate and keep working for 5 seconds. Same as Relay B

Learning and Clear Method:
Learning: Press the learning button once, the LED indicator flashes and press the transmitter button A. The LED indicator turns off 3 times, and the button A will learn normally.
Press the learn button twice, the LED indicator flashes, and press the button B on the transmitter. LED indicator flashes off 3 times, button B will learn normally.
Clear: Press and hold the learning button for about 8 seconds. The indicator turns on and off, then press the remote control. The relay didnt respond to. This means the code has been cleared.

About Transmitter:
Model Number: AK-SF02B
Buttons:Two Buttons
Operating voltage: DC 12 V (1 piece 27 A)
Operating frequency: 315MHz
Remote distance: 66.4 - 164.0 ft (20
Working current: 13 mAh
Encode: Fixed cord / EV1527 code
Size: 5.5 x 3 x 1.4cm

Package Includes:
2 x Transmitter
1 x Receiver
1 x User Manual