Feature

●Motion sensor switch for LED tape lights. Once turned on, it will only turn on for the time you set it, and then turn off automatically. With continuous detection function, electricity is connected while the sensor continues to detect movement. / With built-in light sensor, it will not light up in bright environments
●Voltage: DC 6 V - 24 V / Maximum Allowable Current: 5 A / Body Color: Black / Model Number: TDL-2025 / Sensor Sensitivity Range: Approx. 16 m / Dedicated double-sided tape + screw (1 piece) / Light sensor / Power charging time (short): Approx. 5 minutes to 7 minutes after the response start; Fine adjustment with the dial is long turn left turned. Reduced power transmission time. )
●(About Response Distance) This device responds to temperature changes within a detection area up to 16.4 ft (5 m), but the detection distance varies depending on the high and low temperature difference between the temperature and the human body temperature. As a result, the motion sensor detection distance may vary between winter and summer. It is difficult to detect in the summer and makes it easier to detect
●Dimensions: Body Diameter: Approx. 1.4 inches (3.5 cm) (not including screw stopper) / Height: Approx. 0.7 inches (1.8 cm) / Cable Length: Approx. 7.9 inches (20 cm) / Cable Terminal: Compatible with 0.2 - 0.08 inches (5.5 - 2.1 mm)


Description

[Note]
Only for our LED strip lights.
LED strip light and adapter are required to light up the LED strip.
We do not provide any support for installation other than our LED strips.
We are at your own risk.