■Installation method

1. Determine the mounting position and mark the mounting hole position on the back of the paper holder.

2. Peel off the double-sided tape on the back of the backboard, align the mounting hole with the marked mounting hole and stick the paper holder firmly to the wall.

3. Attach the included screws (4) to the mounting hole and secure the paper holder.

When using an electric screwdriver, please be careful not to overtighten it.

4. Open and close the lid of the paper holder after completing the work to check if there is any abnormalities.

Drill a hole in the pre-marked position and place it in place for easy installation.

■ Precautions for Installation

Please keep dirt and dust clean from the mounting wall.

Adhesive may be weakened.

Please ensure that the top of the paper holder is 5.1 inches (130 mm) or more space in order to allow the paper to be fully opened when installation is complete.

When installed using double-sided tape, you may not be able to install it depending on the condition of the mounting surface (unevenness, curvature or material on the wall).