[Power Supply]

Product Description

Product Introduction: This is a power supply of all 5 ports full isolated circuits that are equipped with custom transformers designed for a dedicated ride. Designed to provide 100 V power to the adapter, with a voltage of 9.4 V or higher at no load conditions, especially with Distortion and Overdrive pedals to create sound and thickness, and can also be expected to increase brightness. The unique noise is greatly reduced when used with digital x analog devices. In dedication to the trend of slimming boards nowadays, we have achieved a compact size with the maximum enclosure size. Switchable port number 5 9, 12, 18 V. Compatible with a wide range of effectors. Best of all, LINK feature allows additional units to be expanded with a cable connection. The layout freely within the board has been greatly improved. Safety Warning: KIP-001 is designed with high voltage, low loss, and structurally as a heat dissipator on the top of the enclosure as a heat conversion at high loads, so if it is running under a heavy load, the upper surface of the enclosure will reach a considerable temperature but it is not a defect. In addition, KIP-001 is fully isolated, so it can support 1,000 mA current consumption using a current doubler or daisy chain cable, etc. However, there may be cases where the upper part of the housing is heated. (*As a reference, the BOSS GT-1000CORE is possible to confirm that it will work without problems even during long periods of time. However, we are not assuming that these are used for this product, so we do not guarantee the operation and we cannot guarantee any defects in the event of a defect. We do not recommend using products with high current consumption, especially those that use large capacity in the included adapter (e.g. HX STOMP-3A). Note (Disclaimer) > Please read the DC cable before unplugging in the power state. It may damage the effector. This product is only limited to the **register. Continue

Safety Warning

KIP-001 is designed to be a heat dissipation plate on the top of the housing for high voltage, low loss, and structurally high heat conversion at high load conditions and the top of the enclosure will reach a considerable temperature when operating under a heavy load. In addition, KIP-001 is fully isolated, so it can support 1,000 mA current consumption using a current doubler or daisy chain cable, etc. However, there may be cases where the upper part of the housing is heated. (*As a reference, the BOSS GT-1000CORE is possible to confirm that it will work without problems even during long periods of time. However, we are not assuming that these are used for this product, so we do not guarantee the operation and we cannot guarantee any defects in the event of a defect. We do not recommend using products with high current consumption, especially those that use large capacity in the included adapter (e.g. HX STOMP-3A)