Feature

●High output current, the maximum output current can reach 8A
●Four high frequency capacity can lower output ripple and improve work stability
●Double heatsink design MOS Schottkey Diode Independent Heatsink with good heat dissipation,
●And it will not affect each other
●Using large center dust core and double pure copper wiring to improve work efficiency and reduce heat


Description

1. Module Characteristics: Non-insulated step-down constant current, charge the constant voltage module (CCs CV) module
2. Input Voltage: DC 7-32V
3. Output voltage: (1) DC 0.8-28V continuous adjustment. (2) Fixed output: Choose between 0.8V-28V
4. Output current: 8A (If the temperature of the power tube exceeds 65 degrees, please add a cooling fan)
Constant Current Range: 0.2-8A (adjustable)
The above turn lamp current: Constant current value*(0.1) will turn the lamp current and constant linkage
Constant current value is 0.1 times on (0.1 x 3 A = 0.3 A) when the lamp current is set to a constant current.
7. Minimum pressure: 1V
8. Output power: Maximum power consumption is about 300W
9. Conversion efficiency: up to 95%
10. Operating frequency: 300kHz
11. Output Ripple: 65.6 ft (20 m) bandwidth
(excluding noise) 12 input 24V output 12V 5A ripple around 50mV
13. Output short circuit protection: Yes, constant current
14. Input Reverse Polarity Protection: No
15. Output prevents backflow: No
16. Wiring: Terminal
17. No-load current: Standard 20 mAh (24 V switch 12 V).
18. Load regulation: ±1% (constant).
19. Voltage regulation: ±1%
20. Dynamic response speed: 5% 200uS
21 Potentiometer Adjustment Direction: Right-turn (increased), Counterclockwise (decreased),
Potentiometer (CV) closes to the input voltage used to adjust the potentiometer (CC), voltage
Used to adjust closed current (CC) to output voltage
22. Operating temperature: Industrial grade (-40°C to + 85°C), (Please pay attention to the actual use.
Power tube temperature and enhanced high temperature heat)
23. Indicator: Dual color indicator, charging indicator light red, green light means
Fully charged (not green when no load)
24. Size (L x W x H): Approx. 2.6 x 1.8 x 0.9 inches (65 x 47 x 22 mm).
Constant current and temperature 25. Precision: actual testing, from 25 degrees to module temperature
Constant current value changes less than 5% (5A constant current) at 60 degrees.
26. Output short-circuit protection: Yes, constant current (current setting constant current value)
27. Input Reverse Connection Protection: NO
NO:28 output prevents backflow