Feature

●[Clear Position]: This semicircular corner quick locator is suitable for positioning and roundness of wood, and the woodworking fillet quick locator is well made and can provide accurate measurements
●(Application Steps) 1. Insert your finger into the round hole in the center of the R-angle sharpening block, release your hand from the tool during use, and strongly attracts it to the board. ② After firmly paste, place the board close to the cutter, first cut the tip of the board into an arc-shaped shape and slowly walk against the side of the rounded template blocks
●Product information: Material: Aluminum alloy (Size: Approx. 3.1 x 3.1 x 0.3 inches (8 x 8 x 0.9 cm) (Uses: Woodworking board positioning, rounding) (Fillet specifications: R15/R20, R25/R30 (Package list: 1 x R15/R20 fillet module (1 x R25/R30)
●[Made Material] The semicircular corner quick positioner is made of aluminum alloy material, durable and the surface of the woodworking fillet locator is laser engraved, not easy to fade, can be stored for a long time
●Caution: 1. It must be used on a workbench such as a flip tip electric mill. 2. Use the trimming knife with a bearing on the top. 3. Please make sure to adjust the height of the trim knife before use. When the machine is not powered, please observe whether the bearing and fillet template of the trimming knife is on the same plane and the milling cutter will not scratch the module or it may be dangerous. 4. The solid wood is sent from left to right along the wood grain, and no upcut milling processing


Description

Function:
1 This semicircular corner quick locator is suitable for positioning and rolling of wood.
2. The woodworking fillet quick locator is well made and can provide precise measurements.
3 The surface of this rounded auxiliary module is anodized and rust resistant.
4 This woodworking fillet locator is engraved on the surface to prevent fading and can be stored for a long time.
5 Semi-round corner quick positioner is made of durable and long life aluminum alloy material.


Specifications:

Item Type: Fillet Quick Locator

Material: Aluminum alloy
Product Identification: Engraving
Surface Treatment: Anodized
Size: Approx. 8 x 8 x 0.9cm / 3.1 x 3.1 x 0.4in
Features: Precise manufacturing, quality assurance, accurate scale, easy operation.
Purpose: Positioning and curing of wood boards
Fillet Specifications: R15/R20, R25/R30
Application Instructions:
(1) Put your finger into the round hole in the middle of the R angle grinder block, pull it firmly against the board and release your hand from the tool while using.
(2) After firmly paste, place the board closer to the cutter, first cut the tip of the board into almost arcs, then slowly step towards the side of the rounded template blocks.








Package List:
1 x R15 / R20