Feature(may vary by option.)

●Guide Numbers: 16 (ISO100)
●Beam angle: 80° x 80°
●Color LCD control panel
●Modeling LED Lamp
●Please make sure to check the compatible list (https://www.nissin-japan.com/compatibilitychart/ ) for your camera

[Nikon]

[ニコン - 米国保証]

Description

TTL compatible ring strobe that can be attached to a variety of lenses with the included adapter ring.

Using the ring type luminous part with guide number 16(*1), you can capture clear photos with less shadows and uneven light.(Our clip-on strobe ratio) With TTL dimming, you dont need to manually adjust the amount of light as the distance changes.(It is also possible to correct light and manual dimming when TTL dimming) It is also recommended for medical purposes such as intraoral photography.(*2)

*1 SO100 m

*2 This product is a civilian machine and does not comply with any medical device standards.

Equipped with fine macro (micro luminous mode).

In addition to manual mode (1/1 - 1/64 and -2/3 EV, 1/3 EV steps), it has a new function that allows you to fine control of microscopic emission of 1/128 - 1/1024 in every 1/6 EV step.

Optical wireless TTL master function

The MF18 has a wireless TTL master function and can control the strobe with wireless TTL remote function as well as group A, C*. Channel settings from 1 to 4Modes can be selected from TTL (dimming correction -3.0 to +3.0, 1/2 EV step) or manual (1/128 to 1/1, 1/3 EV step).

(Does not support NAS or any radio systems)

*The value set in the C group of wireless TTL mode will be applied to the remote strobe set in group A and C.A and C cannot be controlled separately. )

■TTL dimmable.Easy to operate, just press the shutter

Compatible with Canon Nikon Sony TTL Dimming Camera Automatically adjusts the amount of light to capture macro shots simply by attaching it to the camera and pressing the shutter

■ Luminous parts that open and close according to the lens aperture (compatible with lenses of 49mm-77mm)

Adopts a new type of variable size luminous ring, which can be used to make the luminous ring larger or smaller with a single touch. If the macro lens has a large aperture, the luminous part can be opened to reduce vignetting

■ Modeling LED lamp convenient for focusing on subjects

Modeling lamp makes it easy to focusIn addition, according to the light ratio of the luminous ring, the left and right light will also change, which helps you check the lighting effects in advance.

■ Luminous ring for left and right light ratio control

The luminous ring is divided into left and right A/B, and the TTL has 15 different emission ratios for every 1/2EV, allowing you to manually adjust it to left or right side independently or shift at the same time while maintaining the left and right light ratio

Main Specifications

Guide Number	16 (ISO100 m)
Irradiation Angle:	80° x 80°
Power Supply	AA alkaline batteries or NiMH rechargeable batteries x 4 (sold separately) can be used with external power supply (sold separately) (power pack PS8, etc.)
Light intervals	About 0.1 - 5.5 seconds (alkaline batteries, nickel-metal hydride batteries).
Number of luminescences:	Approximately 120 to 800 times (with alkaline batteries). *Varies depending on the mode of use.
Luminous Mode, Dimmer Range	Full Auto/TTL (-3~+3EV, 1/3EV Step) / Medium (Manual 1/1~1/64-2/3EV, 1/3EV Step) / Fine (Fine Macro 1/128~1/1024, 1/6EV Step)
Modeling LED	4 lights
Compatibility	Second curtain sync, high speed sync (FP luminous), slow sync, red-eye reduction luminescence, FE/FV lock *Cannot be used if all functions are not attached to the camera side.
Color Temperature, Flash Time	Approximately 5,600 K/1/700 seconds (both left and right of the luminous ring are full glowing), 1/300 second (only one side of the luminous ring), 1/700 - 1/30,000 second (TTL mode).
Wireless luminescence	Wireless TTL Master Function: Number of Channels: 4, Group Control: A and C x 1, Mode: TTL/Manual; 1. The value set in the C group of wireless TTL mode is applied to the remote strobe set in Group A and C.A and C cannot be controlled separately. )
Terminals	External power terminals (compatible with Nissin or genuine external power supplies), synchronous terminal, firmware update terminal (customer cannot be updated)
Accessories	Adapter Ring (for Canon and Nikon 52/58/62/67/72/77mm 55mm sold separately) for Sony 49/55/62/67/72/77mm (52mm sold separately)
Size / Weight	Main body: Approx. 4.5 inches (115 mm) (H) x 2.6 inches (65 mm) (W) x 3.3 inches (85 mm); Luminescent unit (approx.): 4.7 inches (120 mm) (H) x 5.3 inches (134 mm) (W) x 1.6 inches (41 mm) (D) (446 g) (excluding batteries).

Compatible Cameras

Different camera compatible with different product mount

■ For Canon

[EOS] -1D X / -1Ds Mark III / -1Ds Mark II / -1D Mark IV / -1D Mark III / -1D Mark II N / -1D Mark II / 7D Mark II / 7D / 6D / 5D Mark III / 5D Mark II / 5D / 90D / 70D / 60D / 50D / 40D / 30D / 30D / 20D / 10D / 8000D / R6 / R5 / RP / R

[EOS Kiss] X10i / X10 / X9 / X7i / X7 / X6i / X5 / X4 / X3 / X2 / Digital X / Digital N / Digital / F / X90 / X70 / X50

■ For Nikon

Z 9 / Z 7II / Z 7 / Z 6II / Z 6 / Z 50 / Z fc* / D6 / D5 / D4s / D4 / D3X / D3s / D3 / Df / D850 / D810 / D800E / D750 / D700 D61. 0 / D600 / D500 / D300s / D300 / D200 / D7500 / D7200 / D7100 / D7000 / D5600 / D5500 / D5300 / D5200 / D5100 / D500. 0 / D3500 / D3400 / D3300 / D3200 / D3100 / D3000 / D90 / D80 / D70s / D70 / D60 / D50 / D40X / D40 * Z fc Version 1.2 Please update to 0+.

■For Sony

α7c / 7 / 7 II / 7 III / 7s / 7R II / 7R III / 7R IV / 3000 / 6000 / 6300 / 6400 / 6600 / 77 II / 99 NEX-6 Cyber-shot RX1 / RX10 / HX60V