Feature(may vary by option.)

●Compatible with all vehicles
●Comes with standard grip
●Made in Japan

[Single Item]





Description

Product Description

The goal is to provide a sense of safety when driving a parent-child tandem tandem
The Tandem Touring Belt TB is a completely new Tandem belt with a unique "backplate structure and front and back independent belt system".
This "Backplate Construction and Front and Rear Separate Belt System" helps to hold sleeping passengers (kids) posture and minimize the weight load on the driver.
The passengers side belt and back plate support wraps around the shoulders, shoulder blades and both sides to prevent them from falling off from the seat and provide a smooth escape aid during "standing moke".

Safe and comfortable to wear without belt interference on the neck or head.
Tandem belt that attempts to hold the drivers shoulder and passengers shoulders without the use of a backplate can interfere with the neck and head.
This is not only an uncomfortable feeling of wear, but it can also be very dangerous.
The Tandem Touring Belt TB_ is a tandem belt with a separate construction of the driver and passenger retention belt.
You can also choose the connection position so the belt will not interfere with your neck or head during normal driving.
The comfort of your wear will always be comfortable without any uncomfortable failure and helps reduce the risk of tandem driving.

It does not slip or tear. 4-layer backplate construction
The Tandem Touring Belt TB uses a resilient back plate that has a 4-layer structure on the back of each driver and passenger to eliminate belt misalignment and wear while driving.
Maintains a proper fit and security all the time.
The back plate is made of 2 layers of 420 denier nylon ox, which is highly durable and water repellent, and sandwich 0.2 inch (5 mm) thick high foam polyethylene sheet for a firm feel.
In addition, the back is covered with breathable polyester mesh to prevent stickiness caused by sweat.

The front and back independent belt system greatly reduces the transmission of behavior in the rear seat.
The Tandem Touring Belt TB is a new style tandem belt that uses a method of separating the passenger belt from the driver belt.
The rear behavior is transmitted to the center of the drivers backplate, which minimizes the leverage of levering principles and minimizes movement transmission.
Image on the right shows that the passenger is less attack of the rear passenger will convey to the driver even if it is moving hard.
The belt that holds the passenger is also dispersed across the shoulder belt and the torso belt to prevent the weight from being concentrated on one point.
Even if the rear passenger is completely sleeping, it reduces the load on the driver and allows for a stable ride, so it is also effective for long highway rides.
Note: : Continuously running in the back passenger is dangerous. Make sure you move to a safe station immediately.

Made in Japan with peace of mind. It also has sufficient attention to load capacity.
The Tandem Touring Belt TB is made in Japan.
The sewing thread used for sewing is made of very strong polyester filament thread, especially in stress areas, it is used with industrial rivets that boast over 100 kgf tensile breaking strength per piece to increase its strength.

Main Specs (main part material):
- Driver and Passenger Back Plate Part: 4-layer construction on main part
First layer: 420 denier nylon ox. (reverse side weak water repellent coat).
Second layer: 0.2 inch (5 mm) thick high foam polyethylene cushion seat
Third layer: 420 denier nylon ox. (reverse side weak water repellent coat).
4th layer: polyester mesh (hard type).


■Driver Waist Belt: 0.06 inch (1.6 mm) thick/2.0 inch (50 mm) wide polypropylene
■Driver torso belt buckle: NIFCO 2.0 inches (50 mm) width double adjustment.
■Driver shoulder belt: 0.06 inch (1.6 mm) thick/2.0 inch (50 mm) wide polypropylene
■Driver Shoulder Belt Lada Lock: Made by TIFCO High Strength Ladder Lock
■ Reinforced rivet: Blind rivets made by KRS / aluminum flange
Steel Shaft

■Passenger Waist Belt: 0.06 inch (1.6 mm) thick / 1.5 inch (38 mm) wide polypropylene
■Driver torso belt buckle: NIFCO 1.5 inches (38 mm) width S adjustment.
■Driver shoulder belt: 0.06 inch (1.6 mm) thick/1.5 inch (38 mm) wide polypropylene

Note: Comes with a standard grip

Indications

● Please note that this product is designed specifically for the parent-child tandem, so please note that the weight limit of the rear passengers is up to 88.2 lbs (40 kg) (equivalent to 6 small male and female average weight). Also, for safety, it cannot be used by small children who cant reach their feet or children who cant properly fit their helmet. ● Continuous driving is dangerous for the rear passenger to sleep. Make sure you move to a safe station immediately

Product description

Product Description

The goal is to provide a sense of safety when driving a parent-child tandem tandem
The Tandem Touring Belt TB is a completely new Tandem belt with a unique "backplate structure and front and back independent belt system".
This "Backplate Construction and Front and Rear Separate Belt System" helps to hold sleeping passengers (kids) posture and minimize the weight load on the driver.
The passengers side belt and back plate support wraps around the shoulders, shoulder blades and both sides to prevent them from falling off from the seat and provide a smooth escape aid during "standing moke".

Safe and comfortable to wear without belt interference on the neck or head.
Tandem belt that attempts to hold the drivers shoulder and passengers shoulders without the use of a backplate can interfere with the neck and head.
This is not only an uncomfortable feeling of wear, but it can also be very dangerous.
The Tandem Touring Belt TB_ is a tandem belt with a separate construction of the driver and passenger retention belt.
You can also choose the connection position so the belt will not interfere with your neck or head during normal driving.
The comfort of your wear will always be comfortable without any uncomfortable failure and helps reduce the risk of tandem driving.

It does not slip or tear. 4-layer backplate construction
The Tandem Touring Belt TB uses a resilient back plate that has a 4-layer structure on the back of each driver and passenger to eliminate belt misalignment and wear while driving.
Maintains a proper fit and security all the time.
The back plate is made of 2 layers of 420 denier nylon ox, which is highly durable and water repellent, and sandwich 0.2 inch (5 mm) thick high foam polyethylene sheet for a firm feel.
In addition, the back is covered with breathable polyester mesh to prevent stickiness caused by sweat.

The front and back independent belt system greatly reduces the transmission of behavior in the rear seat.
The Tandem Touring Belt TB is a new style tandem belt that uses a method of separating the passenger belt from the driver belt.
The rear behavior is transmitted to the center of the drivers backplate, which minimizes the leverage of levering principles and minimizes movement transmission.
Image on the right shows that the passenger is less attack of the rear passenger will convey to the driver even if it is moving hard.
The belt that holds the passenger is also dispersed across the shoulder belt and the torso belt to prevent the weight from being concentrated on one point.
Even if the rear passenger is completely sleeping, it reduces the load on the driver and allows for a stable ride, so it is also effective for long highway rides.
Note: : Continuously running in the back passenger is dangerous. Make sure you move to a safe station immediately.

Made in Japan with peace of mind. It also has sufficient attention to load capacity.
The Tandem Touring Belt TB is made in Japan.
The sewing thread used for sewing is made of very strong polyester filament thread, especially in stress areas, it is used with industrial rivets that boast over 100 kgf tensile breaking strength per piece to increase its strength.

Main Specs (main part material):
- Driver and Passenger Back Plate Part: 4-layer construction on main part
First layer: 420 denier nylon ox. (reverse side weak water repellent coat).
Second layer: 0.2 inch (5 mm) thick high foam polyethylene cushion seat
Third layer: 420 denier nylon ox. (reverse side weak water repellent coat).
4th layer: polyester mesh (hard type).


■Driver Waist Belt: 0.06 inch (1.6 mm) thick/2.0 inch (50 mm) wide polypropylene
■Driver torso belt buckle: NIFCO 2.0 inches (50 mm) width double adjustment.
■Driver shoulder belt: 0.06 inch (1.6 mm) thick/2.0 inch (50 mm) wide polypropylene
■Driver Shoulder Belt Lada Lock: Made by TIFCO High Strength Ladder Lock
■ Reinforced rivet: Blind rivets made by KRS / aluminum flange
Steel Shaft

■Passenger Waist Belt: 0.06 inch (1.6 mm) thick / 1.5 inch (38 mm) wide polypropylene
■Driver torso belt buckle: NIFCO 1.5 inches (38 mm) width S adjustment.
■Driver shoulder belt: 0.06 inch (1.6 mm) thick/1.5 inch (38 mm) wide polypropylene

Note: Comes with a standard grip

Indications

● Please note that this product is designed specifically for the parent-child tandem, so please note that the weight limit of the rear passengers is up to 88.2 lbs (40 kg) (equivalent to 6 small male and female average weight). Also, for safety, it cannot be used by small children who cant reach their feet or children who cant properly fit their helmet. ● Continuous driving is dangerous for the rear passenger to sleep. Make sure you move to a safe station immediately

Product information