Feature(may vary by option.)
●Tension jack that allows you to fix one 2 x 4 material to the floor or ceiling
●No tools required! Easy to install 2 steps
●Easy to adjust the height. Secures securely. Prevents the brim from falling over
●Working Load (kg): 110.2 lbs (50 kg)
[Backpack Hanger Single Item]
[Backpack Hanger 2個セット]
[Strong Jack Single Item]
[Flexible hook Single Item]
[Guitar Hanger Single Item]
[Play Hook Single Item]
[Bicycle Hanger Single Item]
Description
<使用方法>
設置場所の床から天井の高さより60mm短い2×4材を用意します。
設置する場所に2×4材を垂直に立てます。
取り付け後は、本製品がしっかり接地されているかをよくご確認の上ご使用ください。
垂直(上下)方向のみ設置可能です。
「WALIST-ONE」専用パーツを使用すれば、自転車やギター、リュックなどを掛けることができ、オリジナルの壁面収納を作ることができます。
<使用荷重について>
●使用荷重の値は「WALIST-ONE」専用パーツ使用時の実験値になります。
「WALIST-ONE」以外のパーツを使用される場合はぐらつきなどご確認の上、転倒の危険がない範囲でご使用ください。
また、設置場所や木材によって条件が変わる為、保証するものではありません。
From the Manufacturer
How to create display storage with a Wolist One?
Measure the height of the place you want to prop the pillar up, buy 2 x 4 materials, 2 x 4 materials, and lift the pole to attach the strong jack and screw the adjustment knob to fix it.
Length of 2 x 4 materials required for pillars = Length from floor to ceiling - (minus) 2.4 inches (6 cm) Please make it in a location where there is no problem with ceiling and floor even if you are stretched out.When purchasing 2 x 4 materials, please choose the one that has less warping or bending as much as possible. No tools required for installing a strong jack. Screw thumb screws and adjustment screws to secure
Product lineup 1.
Prevents tipping over
The angle can be adjusted according to the bicycle frame.
The height can be easily adjusted.
Product lineup 2.
How to install the hanger and hook?
Turn the knob to lower the disc.
Insert the U-shaped metal fittings into the base bracket so that the 2 x 4 material is sandwiched in.
Twist the knob to hold the hardware in place while supporting it to prevent it from falling out.
