Feature

●Turbocharger Characteristics and Functions: Increases engine power by 10-30%. Fuel consumption is reduced by 3-10%. LCD, HC and NOXJ can reduce less than 30%. Effectively protect the engine and reduce wear of carbon stagnation
●Turbine Super Charge Performance Parameters: Working Voltage 12V-16V (test value); Drive Current: 26A (measured value); Voltage Off: 0.8V (practical); Full Speed Voltage: 0.9V-2.2V Working Value
●Turbocharger straight drive parameter: 0.9V-2.5V (measured value); Speed range: 6800rpm -32000rpm; Wind speed range: 5m/s-86m/s (actual measurement); Wind pressure range: 0.05kg/cm-0.2 turbine test value; Adjustment mode: slow valve voltage signal driver Fan Power: 240 Watts
●Fast Installation: A small amount of volume can be easily installed on a variety of product models, normally takes 60-120 minutes. BONUS TIP: We recommend taking pictures or videos before removing old parts, so as to avoid forgetting how to install new parts)
●QUALITY GUARANTEE: Our products have quality problems within 180 days from the date of purchase, and can be returned or refund. If you have any questions or advice, please email us and reply you within 24 hours. Thank you for your support


Description

Electronic Turbine Supercharger Connection Circuit Steps:

Mechanical throttle valve is a wireless launch door. The voltage is 5 volts when you step on the acceleration pedal. If you do not step on the accelerator, it will be 0.3° 0.2.

Red line is ACC key switch line. Open the key door and open the key door. Close the key door.

The blue line depends on whether your car is mechanical throttle or electronic throttle. Connect electronic accelerator to pedal.

The machine and cable and throttle sensor are connected to three wires.

After all lines are connected, the coarse red line at the end of the battery is connected to the positive pole, and the thick black line is connected to the negative pole

Best installed by a professional electrician