50000832-1
Includes an original Japanese instruction manual.
Mercedes Benz Only
Lowering Module OBD
★Please provide your vehicle number (VIN) before purchase.
We will check the manufacturer in advance. (As a general rule of response within 1 to 2 days)
After ordering without VIN confirmation, we will not accept returns or exchanges in case you cannot use it.
Just plug this product into the OBD port on the drivers seat foot, and
+40mm to -70mm height adjustable.
In addition, since the custom mode can be adjusted in 0.04 inch (1 mm) increments,
You can achieve the best setting possible.
Tested to work even with the real Mercedes AMG E53 2018!!
■ For use with airsus vehicles
Not compatible with ABC/MBC vehicles
■Compatible Models
C-class (w205).
E-class (w212/s212/c207/w213/s213/c238)
S-class (w221/w22/c217).
CLS class (w218/w257).
GLC class (x253).
GL/GLS class (x166).
ML/GLE class (w166/c292).
Compatible with Airus vehicles only.
The AMG GT4 door is set for a separate product. (Ordered from the manufacturer)
Equipped with 3 modes:
Choose from left and right operation with dial rotation or command.
---Factory Mode
(When returns to original vehicle height, return from other mode)
---Low Mode
(Manufacturers setting, approximately 1.2 inches (30 mm) lowdown value)
---COSTOM Mode
(Optional setting, maximum of approx. 2.8 inches (70 mm) low down, can be adjusted in 0.04 inch (1 mm) increments)
■Important information
(1) You can only adjust the front and back low down values. The difference between left and right is not adjustable.
(2) For use with airsus vehicles. Not compatible with ABC (Active Body Control) and MBC (Magic Body Control) vehicles.
(3) If the vehicle has been updated, it may not be able to record.
(4) This manual is for E53 AMG 2018 operating examples. Operation method varies depending on the car model. We appreciate your understanding.
(5) We cannot deal with any vehicle side **encountered during installation of this product. Installation is at your own risk.