Feature

●Genuine Yamaha YBR125 YBR125K Front Fork for Mid to Late Period
●Currently available YBR125, YBR125K comes in 2 types, 06 and 07 and later, this product is a front fork that is compatible with 07 and later. In the older model (06), the disc brake on the front tire was a small type, but the new model (07 and later models) has been changed to large discs with good stopping properties. The mounting shape of the fork disc brake caliper has been slightly changed
●Total Length: 27.6 inches (700 mm); Inner Diameter: 1.2 inches (30 mm); Caliper Pitch: 2.7 inches (68 mm); Disc Rotor: 9.6 inches (245 mm); *Cannot be used with early small rotors; Caliper side: type with fender stop stays on the side of the reflector; Axle shaft hole diameter: approx. 0.6 inches (15 inches (15 mm)
●There may be 2 places (unused stays) in front of the brake side outer tube. The total length is 0.4 inch (10 mm) different, but it is compatible. YBR125 is made overseas, so there are no clear parts information. We will provide the information as much as possible, so please check with your current car before purchasing
●◆Note (Disclaimer): Please read this product. The rubber part will deteriorate over time, so we recommend replacing the dust seal regularly. If oil leaks occur due to the natural deterioration of rubber, this product does not indicate a problem


Description

Genuine Yamaha YBR125 YBR125K Front Fork for Mid to Late Period.

Currently available YBR125, YBR125K comes in 2 types, 06 and 07 and later, this product is a front fork that is compatible with 07 and later. In the older model (06), the disc brake on the front tire was a small type, but the new model (07 and later models) has been changed to large discs with good stopping properties. The mounting shape of the fork disc brake caliper has been slightly changed.

Total Length: 27.6 inches (700 mm); Inner Diameter: 1.2 inches (30 mm); Caliper Pitch: 2.7 inches (68 mm); Disc Rotor: 9.6 inches (245 mm); *Cannot be used with early small rotors; Caliper side: type with fender stop stays on the side of the reflector; Axle shaft hole diameter: approx. 0.6 inches (15 inches (15 mm)

There may be 2 places (unused stays) in front of the brake side outer tube. The total length is 0.4 inch (10 mm) different, but it is compatible. YBR125 is made overseas, so there are no clear parts information. We will provide the information as much as possible, so please check with your current car before purchasing.

◆Note (Disclaimer): Please read this product. The rubber part will deteriorate over time, so we recommend replacing the dust seal regularly. If oil leaks occur due to the natural deterioration of rubber, this product does not indicate a problem.