[ETC Case 2]

[ETC Case 1]

TANAX
Introducing a semi-hard type ETC case that is resistant to impacts.

ETC Case 1/2

Specifications:
Product Size: (H x W x D): 4.3 x 6.5 x 2.0 inches (110 x 165 x 50 mm).
Product Number: MF-4751 (ETC Case 1), MF-4752 (ETC Case 2).
Weight: 3.5 oz (100 g).
Material: EVA + synthetic leather
Contents: Main unit x 1, cable ties x 2.
Maximum storage weight: 12.8 oz (350 g).
Antenna Separate ETC Specific: Mitsuba / Japanese radio compatible

Mountable Sizes:
Total length of mounting with the included cable ties is less than 9.8 inches (250 mm)
Please use commercially available cable ties.
Mounting hole: Φ0.4 in (10 mm)

Usable ETC size (excluding wiring)
1.2 x 4.9 x 3.3 inches (30 x 125 x 85 mm) or less

Installation Method *You can choose between 2 types of installation methods.
Uses bolt on the car body.
How to turn the Velcro inside the case and bolt it together to the car body.
If the head of the bolt is small, please adjust it with a commercial washer.
In order to prevent contact with the head of the bolt and the car unit,
The total bolt height and washer thickness should not be more than 10mm.

Use the included cable tie.
How to attach the included cable ties through the hole of the case to the vehicle

How to store the ETC?
The cord should be pinched by the W zipper and taken out the outside and store your ETC in-car device.
Please secure the car unit with Velcro fasteners.

● One point advice
Use the zipper tab to attach the keys for a simple measure of security.
Key not included. Also, be careful not to scratch the vehicle by the key installed.

Installation Examples
Seat, handle braces, and various parts of the frame.